R60-std
rpedde·r60-std
About the R60-std PCB
R60-std is an open source AVR/Arduino PCB design by rpedde, published on GitHub. It is a 2-layer board measuring 285.8 × 95.3 mm, with 156 components from 84 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 72 relays, 65 diodes, 9 capacitors, 5 resistors, 1 IC and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
A standard poker 60% board
This is just a simple poker 60% board as a base for testing stuff.
It's a 16MHz Atmega32U4 running quantum mechanical keyboard firmware.
It should fit in most (all?) 60% poker cases.
I have cnc milled plates for this board using openscad/dxf files generated from this project.
I have cnc milled cases for this board using openscad/stl files generate from this project.
Main components on the R60-std
R60-std bill of materials (BOM)
156 components, 84 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | QFN-44-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | 16MHz | Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | USB_B | USB_Mini-B | P1 |
| 1 | ESC | CHERRY_PCB_100H | K0 |
| 1 | 0 | CHERRY_PCB_100H | K0A1 |
| 1 | MINUS | CHERRY_PCB_100H | K0B1 |
| 1 | EQUAL | CHERRY_PCB_100H | K0C1 |
| 1 | BACKSP | CHERRY_PCB_200H_INVERTED | K0D1 |
| 1 | 1 | CHERRY_PCB_100H | K1 |
| 1 | P | CHERRY_PCB_100H | K1A1 |
| 1 | LBRACE | CHERRY_PCB_100H | K1B1 |
| 1 | RBRACE | CHERRY_PCB_100H | K1C1 |
| 1 | BS_PIPE | CHERRY_PCB_150H | K1D1 |
| 1 | 2 | CHERRY_PCB_100H | K2 |
| 1 | COLON | CHERRY_PCB_100H | K2A1 |
| 1 | QUOTE | CHERRY_PCB_100H | K2B1 |
| 1 | ENTER | CHERRY_PCB_225H | K2D1 |
| 1 | 3 | CHERRY_PCB_100H | K3 |
| 1 | SLASH | CHERRY_PCB_100H | K3A1 |
| 1 | RSHIFT | CHERRY_PCB_275H | K3B1 |
Show 64 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RSHIFT | CHERRY_PCB_175H | K3B1-1 |
| 2 | RFN | CHERRY_PCB_100H | K3C1, K4C1 |
| 1 | 4 | CHERRY_PCB_100H | K4 |
| 1 | RGUI | CHERRY_PCB_125H | K4A1 |
| 1 | RGUI-1 | CHERRY_PCB_100H | K4A1-1 |
| 1 | RCTL | CHERRY_PCB_125H | K4B1 |
| 1 | RCTL-1 | CHERRY_PCB_100H | K4B1-1 |
| 1 | 5 | CHERRY_PCB_100H | K5 |
| 1 | 6 | CHERRY_PCB_100H | K6 |
| 1 | 7 | CHERRY_PCB_100H | K7 |
| 1 | 8 | CHERRY_PCB_100H | K8 |
| 1 | 9 | CHERRY_PCB_100H | K9 |
| 1 | TAB | CHERRY_PCB_150H | K10 |
| 1 | Q | CHERRY_PCB_100H | K11 |
| 1 | W | CHERRY_PCB_100H | K12 |
| 1 | E | CHERRY_PCB_100H | K13 |
| 1 | R | CHERRY_PCB_100H | K14 |
| 1 | T | CHERRY_PCB_100H | K15 |
| 1 | Y | CHERRY_PCB_100H | K16 |
| 1 | U | CHERRY_PCB_100H | K17 |
| 1 | I | CHERRY_PCB_100H | K18 |
| 1 | O | CHERRY_PCB_100H | K19 |
| 1 | CAPS | CHERRY_PCB_175H | K20 |
| 1 | CAPS | CHERRY_PCB_125H | K20-S1 |
| 1 | A | CHERRY_PCB_100H | K21 |
| 1 | S | CHERRY_PCB_100H | K22 |
| 1 | D | CHERRY_PCB_100H | K23 |
| 1 | F | CHERRY_PCB_100H | K24 |
| 1 | G | CHERRY_PCB_100H | K25 |
| 1 | H | CHERRY_PCB_100H | K26 |
| 1 | J | CHERRY_PCB_100H | K27 |
| 1 | K | CHERRY_PCB_100H | K28 |
| 1 | L | CHERRY_PCB_100H | K29 |
| 1 | LSHIFT | CHERRY_PCB_225H | K30 |
| 1 | Z | CHERRY_PCB_100H | K31 |
| 1 | x | CHERRY_PCB_100H | K32 |
| 1 | C | CHERRY_PCB_100H | K33 |
| 1 | V | CHERRY_PCB_100H | K34 |
| 1 | B | CHERRY_PCB_100H | K35 |
| 1 | N | CHERRY_PCB_100H | K36 |
| 1 | M | CHERRY_PCB_100H | K37 |
| 1 | COMMA | CHERRY_PCB_100H | K38 |
| 1 | DOT | CHERRY_PCB_100H | K39 |
| 1 | LCTL | CHERRY_PCB_125H | K40 |
| 1 | LWIN | CHERRY_PCB_125H | K41 |
| 1 | LALT | CHERRY_PCB_125H | K42 |
| 1 | LFN | CHERRY_PCB_125H | K43 |
| 1 | SSPACE-1 | CHERRY_PCB_225H | K44 |
| 1 | SPACE | CHERRY_PCB_625H | K45 |
| 1 | SSPACE-2 | CHERRY_PCB_275H | K45-1 |
| 1 | RALT | CHERRY_PCB_125H | K48 |
| 1 | RALT-1 | CHERRY_PCB_100H | K48-1 |
| 1 | RWIN | CHERRY_PCB_125H | K49 |
| 1 | RWIN-1 | CHERRY_PCB_100H | K49-1 |
| 1 | AST1109MLT | AST1109ML-SMT | LS1 |
| 1 | SW_Push | SW_SPST_TL3342 | SW1 |
| 65 | D | D_0805 | D0, D0A1, D0B1, D0C1, D0D1, D1, D1A1, D1B1 +57 |
| 2 | 18pF | C_0603 | C1, C2 |
| 5 | .1uF | C_0603 | C3, C4, C5, C6, C7 |
| 1 | 1uF | C_0603 | C8 |
| 1 | .1uF | C_0805 | C9 |
| 3 | 22 | RC_0805 | R1, R2, R5 |
| 1 | 10K | RC_0805 | R3 |
| 1 | 10K | R_0603 | R4 |
R60-std design files
The KiCad project lives in the rpedde/r60-std repository on GitHub; these links point at the commit this page was built from.
- Layoutr60-std.kicad_pcb
R60-std: common questions
What microcontroller does the R60-std use?
The R60-std is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the R60-std PCB?
The R60-std measures 285.8 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the R60-std?
156 components, from 84 distinct parts. The full bill of materials is listed on this page.
Where can I download the R60-std design files?
From the rpedde/r60-std repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the R60-std design in my own project?
The repository has no license, so all rights stay with rpedde. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the R60-std without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k