Attiny85 I2C RGB LED v2.0
rsedak·attiny85_I2C_RGB_LED_v2.0·design_files/attiny85_I2C_RGB_LED_v2.kicad_pcb
About the Attiny85 I2C RGB LED v2.0 PCB
Attiny85 I2C RGB LED v2.0 is an open source AVR/Arduino PCB design by rsedak, published on GitHub under the Custom license license. It is a 2-layer board measuring 22.4 × 36.4 mm, with 9 components from 7 distinct parts.
Its main chip is the ATtiny85-20PU, from the AVR/Arduino family. By type, the board carries 5 resistors, 1 IC, 1 connector, 1 diode and 1 capacitor.
From the project
Purpose of ATtiny85 I2C RGB LED module is student education. It is published under Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. I hope you will enjoy it.
Purpose of ATtiny85 I2C RGB LED module is student education. It shows how to controll RGB via I2C protocol.
Contributor ------------ - Robert Sedak — features, programming, schematic design, CAD design.
Application ----------- Robert Sedak made a video with example programmed in Arduino IDE with ATtiny85 support:
You can download example for Arduino IDE from here.

Main components on the Attiny85 I2C RGB LED v2.0
Attiny85 I2C RGB LED v2.0 bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny85-20PU | DIP-8_W7.62mm | U1 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LED_RCGB | LED_D5.0mm-4_RGB | D1 |
| 1 | 0.1uF | C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1 |
| 2 | 560R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 620R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 2 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
Attiny85 I2C RGB LED v2.0 design files
The KiCad project lives in the rsedak/attiny85_I2C_RGB_LED_v2.0 repository on GitHub; these links point at the commit this page was built from.
Attiny85 I2C RGB LED v2.0: common questions
What microcontroller does the Attiny85 I2C RGB LED v2.0 use?
The Attiny85 I2C RGB LED v2.0 is built around the ATtiny85-20PU, from the AVR/Arduino family.
How big is the Attiny85 I2C RGB LED v2.0 PCB?
The Attiny85 I2C RGB LED v2.0 measures 22.4 × 36.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Attiny85 I2C RGB LED v2.0?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Attiny85 I2C RGB LED v2.0 design files?
From the rsedak/attiny85_I2C_RGB_LED_v2.0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Attiny85 I2C RGB LED v2.0 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Attiny85 I2C RGB LED v2.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k