Tranceiver 101 PCB rece
rubaiyat666·Transceiver_101·Tranceiver_101_PCB_rece/Tranceiver_101_PCB_rece.kicad_pcb
About the Tranceiver 101 PCB rece
Tranceiver 101 PCB rece is an open source AVR/Arduino PCB design by rubaiyat666, published on GitHub. It is a 2-layer board measuring 44.1 × 57.1 mm, with 10 components from 7 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the LM1117T-2.5 and NRF24L01_Breakout. By type, the board carries 4 capacitors, 3 connectors, 2 ICs and 1 module.
It belongs with the robotics & motion and rf & radio designs in this gallery.
From the project
This is a universal remote controller for almost any remote device e.g. Planes,drones,boats or rc cars. It can be mounted and set up in any custom project the needs remote controlling.
-customisable for drone flight controllers
There is a notch that shuold be kept in mind.

Main components on the Tranceiver 101 PCB rece
Tranceiver 101 PCB rece bill of materials (BOM)
10 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117T-2.5 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U3 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 3 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 100nf | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 1 | 100μf | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 10μf | CP_Radial_D5.0mm_P2.00mm | C4 |
Tranceiver 101 PCB rece design files
The KiCad project lives in the rubaiyat666/Transceiver_101 repository on GitHub; these links point at the commit this page was built from.
Tranceiver 101 PCB rece: common questions
What microcontroller does the Tranceiver 101 PCB rece use?
The Tranceiver 101 PCB rece is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Tranceiver 101 PCB rece?
The Tranceiver 101 PCB rece measures 44.1 × 57.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tranceiver 101 PCB rece?
10 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tranceiver 101 PCB rece design files?
From the rubaiyat666/Transceiver_101 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tranceiver 101 PCB rece design in my own project?
The repository has no license, so all rights stay with rubaiyat666. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tranceiver 101 PCB rece without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Transceiver_101
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k