HardLabs

Espcamreceiver

rudranshgoel1·Fax-Repo·PCB/espcamreceiver backup/espcamreceiver.kicad_pcb

Espcamreceiver PCB layout, top view — open source ESP32 board by rudranshgoel1

About the Espcamreceiver PCB

Espcamreceiver is an open source ESP32 PCB design by rudranshgoel1, published on GitHub. It is a 2-layer board measuring 93.5 × 61.5 mm, with 7 components from 7 distinct parts.

Its main chip is the MODULE_ESP32-S3-SuperMini, from the ESP32 family. By type, the board carries 3 switches, 2 ICs and 2 capacitors.

Main components on the Espcamreceiver

MODULE_ESP32-S3-SuperMini

Espcamreceiver bill of materials (BOM)

7 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
MODULE_ESP32-S3-SuperMini
U2
1
Capture
SW1
1
Gallery
SW2
1
Delete
SW3
1
100nF
C1
1
10uF
C2

Espcamreceiver design files

The KiCad project lives in the rudranshgoel1/Fax-Repo repository on GitHub; these links point at the commit this page was built from.

Espcamreceiver: common questions

What microcontroller does the Espcamreceiver use?

The Espcamreceiver is built around the MODULE_ESP32-S3-SuperMini, from the ESP32 family.

How big is the Espcamreceiver PCB?

The Espcamreceiver measures 93.5 × 61.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Espcamreceiver?

7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Espcamreceiver design files?

From the rudranshgoel1/Fax-Repo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Espcamreceiver design in my own project?

The repository has no license, so all rights stay with rudranshgoel1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Espcamreceiver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards