Rmods spi tft board

rusaakkmods·rmods_spi_tft_board·schematic/ili9341 custom board.kicad_sch

This repository ships a schematic but no board layout.

About the Rmods spi tft board

Rmods spi tft board is an open source PCB design by rusaakkmods, published on GitHub under the GPL-3.0 license. It is a board, with 21 components from 13 distinct parts.

Other key parts include the MIC5219-3.3 and CD74HC4050. By type, the board carries 10 resistors, 6 capacitors, 2 ICs, 2 connectors and 1 transistor.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

custom SPI TFT Motherboard

A custom PCB breakout board designed to interface ILI9341 TFT displays with microcontrollers via SPI communication. This board simplifies the connection between an 18-pin FPC ILI9341 display and standard microcontroller development boards.

- Display Support: ILI9341 TFT with 18-pin FPC connector (0.8mm pitch) - Simple Interface: 8-pin header for easy microcontroller connection - Voltage Regulation: Onboard 3.3V LDO (MIC5219-3.3) for stable display power - Level Shifting: 74HC4050 buffer for 5V-tolerant inputs - Backlight Control: PWM-controlled LED driver with MOSFET switching - ESD…

Main components on the Rmods spi tft board

MIC5219-3.3CD74HC4050

Rmods spi tft board bill of materials (BOM)

21 components, 13 distinct parts.

QtyPartRefs
1
MIC5219-3.3
U1
1
CD74HC4050
U2
1
AO3400
Q1
1
ILI9341 FPC 18p 0.8mm
J1
1
Break Out
J2
3
10uF
C1, C2, C5
1
0.1uF
C3
1
100nF
C4
1
1nF
C6
5
33R
R1, R2, R3, R4, R5
2
10K
R6, R7
2
100R
R8, R9
1
100K
R10

Rmods spi tft board design files

The KiCad project lives in the rusaakkmods/rmods_spi_tft_board repository on GitHub; these links point at the commit this page was built from.

Rmods spi tft board: common questions

How many components are on the Rmods spi tft board?

21 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rmods spi tft board design files?

From the rusaakkmods/rmods_spi_tft_board repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Rmods spi tft board design in my own project?

Yes, under the terms of its GPL-3.0 license, which rusaakkmods chose for the repository.

Similar boards