Tic-Tac-Toe

RyanWillie·Tic-Tac-Toe-PCB·KiCad/TickTacToe.kicad_pcb

Tic-Tac-Toe PCB layout, top view — open source AVR/Arduino board by RyanWillie

About the Tic-Tac-Toe PCB

Tic-Tac-Toe is an open source AVR/Arduino PCB design by RyanWillie, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 104 × 139 mm, with 100 components from 11 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the LM78L05ACMX_NOPB. By type, the board carries 73 diodes, 10 switches, 8 resistors, 4 capacitors, 2 ICs and 2 connectors.

From the project

Circuit design to play tic tac toe

A continuation of my Hobby PCB designs is the arduino based Tic Tac Toe circuit, utilising some surface mount components this circuit was aimed to give some practical experience in implementing a microcontroller from scratch utilising the reference design sheets. Using multiplexing each grid is able to light up with an X or a O to indicate who has claimed the tile.

Tic-Tac-Toe, from the project README
From the project README

Main components on the Tic-Tac-Toe

ATmega328P-AULM78L05ACMX_NOPB

Tic-Tac-Toe bill of materials (BOM)

100 components, 11 distinct parts.

QtyPartRefs
1
ATmega328P-AU
U1
1
LM78L05ACMX_NOPB
U2
1
Crystal
Y1
1
ICSP
J1
1
Conn_01x02
J2
10
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2
73
LED
D1, D2, D3, D4, D5, D6, D7, D8 +65
1
100nF
C1
2
1uF
C2, C4
1
7uF
C3
8
1k
R1, R2, R3, R4, R5, R6, R7, R8

Tic-Tac-Toe design files

The KiCad project lives in the RyanWillie/Tic-Tac-Toe-PCB repository on GitHub; these links point at the commit this page was built from.

Tic-Tac-Toe: common questions

What microcontroller does the Tic-Tac-Toe use?

The Tic-Tac-Toe is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the Tic-Tac-Toe PCB?

The Tic-Tac-Toe measures 104 × 139 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tic-Tac-Toe?

100 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tic-Tac-Toe design files?

From the RyanWillie/Tic-Tac-Toe-PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Tic-Tac-Toe design in my own project?

Yes, under the terms of its GPL-2.0 license, which RyanWillie chose for the repository.

Can I test firmware for the Tic-Tac-Toe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards