Robot control
rzoli·robot-control·motor_controller_2/mc2.kicad_pcb
About the Robot control PCB
Robot control is an open source AVR/Arduino PCB design by rzoli, published on GitHub. It is a 2-layer board measuring 120 × 55 mm, with 57 components from 29 distinct parts.
Its main chip is the ATXMEGA32A4U-A, from the AVR/Arduino family. Other key parts include the TS1117E33, TS1117E50, PC817, R-78BXX and TLP280. By type, the board carries 20 resistors, 15 capacitors, 10 ICs, 8 connectors and 4 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Building a robot that can map its environment. Software, firmware, pcb design
Main components on the Robot control
Robot control bill of materials (BOM)
57 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS1117E33 | SOT-223 | U1 |
| 1 | TS1117E50 | SOT-223 | U2 |
| 2 | PC817 | OPB606 | U3, U4 |
| 1 | R-78BXX | TO-220_Neutral123_Vertical | U5 |
| 1 | ATXMEGA32A4U-A | TQFP-44_10x10mm_Pitch0.8mm | U6 |
| 1 | TLP280 | SOIC16 | U7 |
| 2 | BD6221F-E2 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U8, U9 |
| 1 | ts321 | SOT-23-5 | U10 |
| 1 | Battery | Pin_Header_Straight_1x02 | P1 |
| 1 | Servo | Pin_Header_Straight_1x03 | P2 |
| 1 | Uart | Pin_Header_Straight_1x03 | P3 |
| 1 | Ultrasound | Pin_Header_Straight_1x06 | P4 |
| 1 | Motor left | Pin_Header_Straight_1x02 | P5 |
| 1 | Motor right | Pin_Header_Straight_1x02 | P6 |
| 1 | ISP | Pin_Header_Straight_2x03 | P7 |
| 1 | RPi 5V | Pin_Header_Straight_1x02 | P8 |
| 1 | SS24 | DO-214BA | D10 |
| 3 | LED | R_0603_HandSoldering | D11, D60, D61 |
| 1 | 47 pF | C_0603_HandSoldering | C10 |
| 7 | 100 nF | C_0603_HandSoldering | C11, C60, C61, C62, C63, C81, C91 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1 uF | C_0603_HandSoldering | C12 |
| 4 | 10 uF | SMD-1206_Pol | C13, C14, C20, C21 |
| 2 | 10 nF | C_0603_HandSoldering | C80, C90 |
| 9 | 300 | R_0603_HandSoldering | R11, R30, R40, R60, R61, R70, R72, R74 +1 |
| 2 | 0 | R_0603_HandSoldering | R12, R13 |
| 6 | 10k | R_0603_HandSoldering | R31, R41, R71, R73, R75, R77 |
| 1 | 4k7 | R_0603_HandSoldering | R62 |
| 1 | 510k | R_0603_HandSoldering | R100 |
| 1 | 39k | R_0603_HandSoldering | R101 |
Robot control design files
The KiCad project lives in the rzoli/robot-control repository on GitHub; these links point at the commit this page was built from.
Robot control: common questions
What microcontroller does the Robot control use?
The Robot control is built around the ATXMEGA32A4U-A, from the AVR/Arduino family.
How big is the Robot control PCB?
The Robot control measures 120 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robot control?
57 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robot control design files?
From the rzoli/robot-control repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Robot control design in my own project?
The repository has no license, so all rights stay with rzoli. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robot control without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k