Kicad kria jtag
s59mz·kicad-kria-jtag
About the Kicad kria jtag PCB
Kicad kria jtag is an open source PCB design by s59mz, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 27.9 × 24.1 mm, with 2 components from 2 distinct parts.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
JTAG adapter PCB for Kria kv260 FPGA development board

Kicad kria jtag bill of materials (BOM)
2 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Male 14P 2.54mm | IDC-Header_2x07_P2.54mm_Vertical | J1 |
| 1 | Female Angled 2.0mm | PinSocket_2x07_P2.00mm_Horizontal | J2 |
Kicad kria jtag design files
The KiCad project lives in the s59mz/kicad-kria-jtag repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad-kria-jtag.kicad_pcb
- Schematickicad-kria-jtag.kicad_sch
Kicad kria jtag: common questions
How big is the Kicad kria jtag PCB?
The Kicad kria jtag measures 27.9 × 24.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad kria jtag?
2 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad kria jtag design files?
From the s59mz/kicad-kria-jtag repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad kria jtag design in my own project?
Yes, under the terms of its GPL-3.0 license, which s59mz chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979