Ts52k
sadaoikebe·ts52k·pcb/ts52k.kicad_pcb
About the Ts52k PCB
Ts52k is an open source AVR/Arduino PCB design by sadaoikebe, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 307.2 × 80.4 mm, with 132 components from 27 distinct parts.
Its main chip is the ATMEGA32U4, from the AVR/Arduino family. Other key parts include the TPD4E1U06DBV. By type, the board carries 54 diodes, 52 LEDs, 9 capacitors, 8 resistors, 3 connectors and 2 ICs.
It belongs with the keyboards designs in this gallery.
From the project
TS52K 4-row Oyayubi Shift keyboard
QMK対応 英数レイヤーも親指シフト JLCPCBで作成したPCB 3Dプリントしたケース
Item |ソース | 数量 | 備考 :--- | :--- | :--- | :--- TS52K PCBA | JLCPCB PCBA | 1 | ケース ふた | 3D Printed | 1 | FDM 3Dプリンタで出力できる設計 ケース 底板 | 3D Printed | 1 | FDM 3Dプリンタで出力できる設計 定位板 | Laser Cut Brass | 1 | t=1.5mm できるだけ重い金属が良い ヒートセット M3x6mmx4.6mm | AliEx/淘宝等 | 8 | 長さは6mmでなくても良い RPG | | 1 | キースイッチ | AliEx/淘宝/自キ専門店等 | 52 | お好きな打鍵感のものを。Kailh Box白軸おすすめ M3 円頭六角ボルト 6mm | | 8 | クッション 2mm厚 x 2mm x 87mm | | 12 | Poron/EVAフォーム等 2u スタビライザー | AliEx/淘宝/自キ専門店等 | 3 | PCB Mount 3u スタビライザー | AliEx/淘宝/自キ専門店等 | 1 | PCB Mount キーキャップ | AliEx/淘宝/自キ専門店等 | 1セット | 3u, 2.75u…
Main components on the Ts52k
Ts52k bill of materials (BOM)
132 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4 | QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | TPD4E1U06DBV TPD4E1U06 | SOT-363_SC-70-6 | U2 |
| 1 | CSTNE16M0V530000R0 CSTNE16 | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | HRO_TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | RGB | PinHeader_1x03_P2.00mm_Vertical | J2 |
| 1 | ISP | PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | SMD0805B050TF Resettable Fuse | Fuse_0805_2012Metric | F1 |
| 1 | SW_SPST | SW_SPST_TL3342 | SW1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 2 | MX-NoLED | MXOnly-1.5U-NoLED | MX2, MX64 |
| 2 | MX-NoLED | MXOnly-1.75U-NoLED | MX3, MX75 |
| 2 | MX-NoLED | MXOnly-2.25U-NoLED | MX4, MX65 |
| 5 | MX-NoLED | MXOnly-1.25U-NoLED | MX5, MX9, MX14, MX81, MX82 |
| 39 | MX-NoLED | MXOnly-1U-NoLED | MX7, MX8, MX11, MX12, MX13, MX16, MX17, MX18 +31 |
| 1 | MX-NoLED | MXOnly-3U-ReversedStabilizers-NoLED | MX23 |
| 1 | MX-NoLED | MXOnly-2.75U-ReversedStabilizers-NoLED | MX60 |
| 53 | D | D_SOD-123 | D2, D3, D4, D5, D7, D8, D9, D11 +45 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 1 | 1u | C_0603_1608Metric | C1 |
| 6 | 0.1u | C_0402_1005Metric | C2, C3, C5, C7, C19, C20 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1u | C_0603_1608Metric | C4 |
| 1 | 4.7u | C_0603_1608Metric | C6 |
| 2 | 10k | R_0805_2012Metric | R1, R4 |
| 2 | 22 | R_0603_1608Metric | R2, R3 |
| 2 | 5.1k | R_0603_1608Metric | R5, R6 |
| 1 | Open | R_0603_1608Metric | R7 |
| 1 | 330 | R_0603_1608Metric | R8 |
Ts52k design files
The KiCad project lives in the sadaoikebe/ts52k repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ts52k.kicad_pcb
- Schematicpcb/ts52k.kicad_sch
Ts52k: common questions
What microcontroller does the Ts52k use?
The Ts52k is built around the ATMEGA32U4, from the AVR/Arduino family.
How big is the Ts52k PCB?
The Ts52k measures 307.2 × 80.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ts52k?
132 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ts52k design files?
From the sadaoikebe/ts52k repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ts52k design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Ts52k without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k