HardLabs

Arduino pro mini KiCad5

sagarHackeD·Arduino_pro_mini_KiCad5

Arduino pro mini KiCad5 PCB layout, top view — open source AVR/Arduino board by sagarHackeD

About the Arduino pro mini KiCad5 PCB

Arduino pro mini KiCad5 is an open source AVR/Arduino PCB design by sagarHackeD, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 33.7 × 20.3 mm, with 18 components from 11 distinct parts.

Its main chip is the ATMEGA328P, from the AVR/Arduino family. Other key parts include the MIC5205-2.5YM5. By type, the board carries 6 capacitors, 5 resistors, 2 ICs, 2 diodes, 1 crystal and 1 jumper.

From the project

Arduino pro mini project in kicad 5

Main components on the Arduino pro mini KiCad5

MIC5205-2.5YM5ATMEGA328P

Arduino pro mini KiCad5 bill of materials (BOM)

18 components, 11 distinct parts.

QtyPartRefs
1
MIC5205-2.5YM5
U1
1
ATMEGA328P
U2
1
Resonator_Small
Y1
1
SolderJumper_2_Bridged
JP1
1
MOMENTARY-SWITCH-SPST-2-SMD-5.2MM
S1
1
red
D1
1
LED
D2
2
10u
C1, C2
4
0.1u
C3, C4, C5, C6
2
10k
R1, R2
3
R
R3, R4, R5

Arduino pro mini KiCad5 design files

The KiCad project lives in the sagarHackeD/Arduino_pro_mini_KiCad5 repository on GitHub; these links point at the commit this page was built from.

Arduino pro mini KiCad5: common questions

What microcontroller does the Arduino pro mini KiCad5 use?

The Arduino pro mini KiCad5 is built around the ATMEGA328P, from the AVR/Arduino family.

How big is the Arduino pro mini KiCad5 PCB?

The Arduino pro mini KiCad5 measures 33.7 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino pro mini KiCad5?

18 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino pro mini KiCad5 design files?

From the sagarHackeD/Arduino_pro_mini_KiCad5 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino pro mini KiCad5 design in my own project?

Yes, under the terms of its GPL-3.0 license, which sagarHackeD chose for the repository.

Can I test firmware for the Arduino pro mini KiCad5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards