Blinky board crown
sahasrasoc-bit·blinky_board_crown
About the Blinky board crown
Blinky board crown is an open source PCB design by sahasrasoc-bit, published on GitHub. It is a 2-layer board measuring 100 × 55.3 mm, with 19 components from 10 distinct parts.
Other key parts include the NE555P and 4017. By type, the board carries 10 diodes, 2 ICs, 2 connectors, 2 capacitors and 2 resistors.
From the project
Blinky board created to look like a crown; the jems are represented by led lights.
BUILT FINAL PROJECT --------------------------------
Main components on the Blinky board crown
Blinky board crown bill of materials (BOM)
19 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | 4017 | DIP-16_W7.62mm | U2 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x01_Socket | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | 50k | Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 10 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 1 uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 0.01 uF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C2 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Blinky board crown design files
The KiCad project lives in the sahasrasoc-bit/blinky_board_crown repository on GitHub; these links point at the commit this page was built from.
- LayoutBlinky_crown.kicad_pcb
- SchematicBlinky_crown.kicad_sch
Blinky board crown: common questions
How big is the Blinky board crown?
The Blinky board crown measures 100 × 55.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blinky board crown?
19 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Blinky board crown design files?
From the sahasrasoc-bit/blinky_board_crown repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Blinky board crown design in my own project?
The repository has no license, so all rights stay with sahasrasoc-bit. Use it as a reference, and ask the author before reusing the design.