Kryptonite
samienr·kryptonite
About the Kryptonite PCB
Kryptonite is an open source STM32 PCB design by samienr, published on GitHub under the MIT license. It is a 2-layer board measuring 26.3 × 17.1 mm, with 27 components from 15 distinct parts.
Its main chip is the STM32F072CBU6, from the STM32 family. Other key parts include the ATECC608B-MAHDA-S, MCP1700T-3302E/TT and USBLC6-2SC6. By type, the board carries 12 capacitors, 6 resistors, 4 ICs, 2 connectors, 1 crystal and 1 switch.
From the project
affordable open source USB-C security key using STM32F072CBU6 and ATECC608A
Main components on the Kryptonite
Kryptonite bill of materials (BOM)
27 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBU6 STM32F072CBUx STMicroelectronics | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | ATECC608B-MAHDA-S ATECC608B-MAHDA Microchip Tech | DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U2 |
| 1 | MCP1700T-3302E/TT MCP1700x-330xxTT Microchip Tech | SOT-23 | U3 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U4 |
| 1 | TAXM8M4RLBDDT2T 8MHz Yajingxin | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DS1021-1x4SF11-B Conn_01x04_Pin CONNFLY | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TYPE-C-31-G-01 USB_C_Plug_USB2.0 Korean Hroparts Elec | TYPE-C-31-G-01 | P1 |
| 1 | TS-1187A-B-A-B SW_Push XKB Connection | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | XL-1608SURC-06 GR XINGLIGHT | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 3 | C0603X5R106M160NT 10u SANYEAR | C_0603_1608Metric | C1, C11, C12 |
| 7 | CGA0402X7R104K160GT 100n HRE | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C10 |
| 2 | TCC0402COG330J500AT 33p CCTC | C_0402_1005Metric | C8, C9 |
| 2 | RC0402FR-0710KL 10k YAGEO | R_0402_1005Metric | R1, R5 |
| 3 | 0402WGJ0472TCE 4k7 UNI-ROYAL(Uniroyal Elec) | R_0402_1005Metric | R2, R3, R4 |
| 1 | FRC0402J680 TS 68 FOJAN | R_0402_1005Metric | R6 |
Kryptonite design files
The KiCad project lives in the samienr/kryptonite repository on GitHub; these links point at the commit this page was built from.
- Layoutkryptonite.kicad_pcb
- Schematickryptonite.kicad_sch
- BOMmanufacturing/BOM.csv
Kryptonite: common questions
What microcontroller does the Kryptonite use?
The Kryptonite is built around the STM32F072CBU6, from the STM32 family.
How big is the Kryptonite PCB?
The Kryptonite measures 26.3 × 17.1 mm, has 2 copper layers and is 0.7912 mm thick.
How many components are on the Kryptonite?
27 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kryptonite design files?
From the samienr/kryptonite repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kryptonite design in my own project?
Yes, under the terms of its MIT license, which samienr chose for the repository.
Can I test firmware for the Kryptonite without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k