VaporTrack
Samuel-Habib·VaporTrack·hardware/VaporTrack_Board.kicad_pcb
About the VaporTrack PCB
VaporTrack is an open source STM32 PCB design by Samuel-Habib, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 65 mm, with 25 components from 19 distinct parts.
Its main chip is the STM32F446RET6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 9 connectors, 9 capacitors, 4 resistors, 2 ICs and 1 diode.
It belongs with the robotics & motion, displays & leds and power & battery designs in this gallery.
From the project
Autonomous Gas Sensing Rover - Spring 2026 Capstone
VaporTrack is an autonomous robotic rover powered by an STM32F446RE (ARM Cortex-M4F @ 180 MHz) running FreeRTOS. The rover characterizes spatial volatile organic compound (VOC) gas distributions in indoor environments, computes 2D spatial gradients ($\nabla G = [\partial G/\partial x, \partial G/\partial y]$) via weighted planar least-squares regression, and tracks plume sources while executing reactive obstacle avoidance using a 3-sensor ultrasonic array.
Main components on the VaporTrack
VaporTrack bill of materials (BOM)
25 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F446RET6 STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | J_BME688 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | J_BNO055 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | J_OLED | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | J_HC_SR04_1 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | J_HC_SR04_2 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | J_HC_SR04_3 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | L298N | PinHeader_1x07_P2.54mm_Vertical | J9 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 2 | CL21A106KOQNNNE 10uF | C_0805_2012Metric | C1, C2 |
| 2 | CL21B104KBCNNNC 100nF | C_0805_2012Metric | C3, C5 |
| 1 | CL21B225KOFNNNE 2.2uF | C_0805_2012Metric | C4 |
| 4 | CL21B104KBCNNNC C | C_0805_2012Metric | C6, C7, C8, C9 |
| 1 | RC0805JR-0710KL 10k | R_0805_2012Metric | R1 |
| 2 | RC0805JR-074K7L 4.7k | R_0805_2012Metric | R2, R3 |
| 1 | RC0805JR-07330RL 330 | R_0805_2012Metric | R4 |
VaporTrack design files
The KiCad project lives in the Samuel-Habib/VaporTrack repository on GitHub; these links point at the commit this page was built from.
VaporTrack: common questions
What microcontroller does the VaporTrack use?
The VaporTrack is built around the STM32F446RET6, from the STM32 family.
How big is the VaporTrack PCB?
The VaporTrack measures 65 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VaporTrack?
25 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VaporTrack design files?
From the Samuel-Habib/VaporTrack repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VaporTrack design in my own project?
Yes, under the terms of its MIT license, which Samuel-Habib chose for the repository.
Can I test firmware for the VaporTrack without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k