17 open source boards using the STM32F446RET6

Real designs built with the STM32F446RET6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the STM32F446RET6

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the STM32F446RET6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF).
  • The VCAP_1 pin has a capacitor to GND on 11 of 11 designs, most often 4.7 µF (then 2.2 µF).
  • The VBAT pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 10 µF).
  • The NRST pin has a capacitor to GND on 9 of 13 designs, most often 100 nF.
VBATpin 1Connected to: 3.3V 77% · not connected 15%
  • Decoupling capacitor on 69% · 100 nF (15), 10 µF (5)
PH0pin 5Connected to: Signal 69% · not connected 23%
  • Crystal on 62% · 16 MHz (2), 8.192 MHz (2), 8 MHz (1)
  • Capacitor to GND on 54% · 22 pF (2), 8 pF (1), 15 pF (1)
PH1pin 6Connected to: Signal 77% · not connected 23%
  • Crystal on 54% · 16 MHz (2), 8.192 MHz (2), 8 MHz (1)
  • Capacitor to GND on 54% · 22 pF (2), 8 pF (1), 15 pF (1)
NRSTpin 7Connected to: A connector 62%
  • Capacitor to GND on 69% · 100 nF (9)
PC0pin 8Connected to: A connector 38% · not connected 31%
  • Series resistor on 31% · 4.7 kΩ (2), 100 Ω (2), 15 kΩ (1)
PC2pin 10Connected to: A connector 36% · not connected 27%
  • Series resistor on 36% · 5.1 kΩ (2), 15 kΩ (1), 33 Ω (1)
VSSApin 12Connected to: GND 100%
VDDApin 13Connected to: 3.3V 73% · a signal 27%
  • Decoupling capacitor on 82% · 100 nF (10), 1 µF (5), 10 µF (2)
PA1pin 15Connected to: A connector 36% · not connected 18%
  • Series resistor on 36% · 10 kΩ (2), 15 kΩ (1), 33 Ω (1)
PA2pin 16Connected to: A connector 55%
  • Series resistor on 36% · 10 kΩ (2), 15 kΩ (1), 33 Ω (1)
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (54), 10 µF (10), 1 µF (2)
PA7pin 23Connected to: A connector 55%
  • Series resistor on 36% · 10 kΩ (2), 15 kΩ (1), 33 Ω (1)
PC4pin 24Connected to: A connector 55% · not connected 18%
  • Series resistor on 36% · 100 kΩ (2), 10 kΩ (2)
PC5pin 25Connected to: A connector 45%
  • Series resistor on 36% · 10 kΩ (3)
VCAP_1pin 30Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (5), 2.2 µF (3), 1 µF (2)
BOOT0pin 60Connected to: Signal 82%
  • Resistor to GND on 64% · 10 kΩ (6), 100 kΩ (1)

41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Printalyzer - Main Board by dektronics, Allcolours analogue by microresearch, Flight-Computer by ImperialSpaceSociety and TBB by formulaslug.

The STM32F446RET6 in open source designs

The gallery holds 17 open source boards using the STM32F446RET6 from 13 GitHub repositories; a typical one measures about 92.5 × 101.6 mm and carries around 132 components.

53% use four copper layers or more, and 35% carry an open source license.

The most starred is Printalyzer - Main Board by dektronics.

Parts used alongside the STM32F446RET6

Microcontrollers on boards using the STM32F446RET6

STM32F446RET6: common questions

Where can I find a STM32F446RET6 reference design?

Each of the 17 boards on this page is a real design using the STM32F446RET6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F446RET6 VDD pin?

The VDD pins have a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the STM32F446RET6.

How is the STM32F446RET6 VCAP_1 pin connected?

The VCAP_1 pin has a capacitor to GND on 11 of 11 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 13 open source designs using the STM32F446RET6.

What decoupling capacitors do designs use on the STM32F446RET6 VBAT pin?

The VBAT pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the STM32F446RET6.

What parts are used alongside the STM32F446RET6?

The AMS1117-3.3, LM358M/NOPB and TPS79533DCQ appear in the most repositories here.

Which microcontrollers do boards using the STM32F446RET6 use?

Most are built on STM32 (16) and ESP8266 (1).

How big is a typical board using the STM32F446RET6?

The median is 92.5 × 101.6 mm, and 47% are two-layer designs.

What is the most popular open source board using the STM32F446RET6?

By GitHub stars, Printalyzer - Main Board by dektronics, with 37 stars.

Can I simulate one of these boards using the STM32F446RET6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part