HardLabs

Yask

sanderboer·box_o_alps·yask/yask.kicad_pcb

Yask PCB layout, top view — open source RP2040/RP2350 board by sanderboer

About the Yask PCB

Yask is an open source RP2040/RP2350 PCB design by sanderboer, published on GitHub under the MIT license. It is a 2-layer board measuring 265.6 × 116.4 mm, with 39 components from 5 distinct parts.

Its main chip is the XIAO-RP2040, from the RP2040/RP2350 family. Other key parts include the alps-smd-sod-123.

It belongs with the keyboards designs in this gallery.

From the project

An alps keeb in a box.

Main components on the Yask

alps-smd-sod-123

Yask bill of materials (BOM)

39 components, 5 distinct parts.

QtyPartRefs
1
alps-smd-sod-123
U24
2
XIAO-RP2040
MLEFT1, MRIGHT1
33
alps-smd-sod-123
UL0, UL1, UL2, UL3, UL4, UL10, UL11, UL12 +25
2
PJ-320A
Uleft1, Uright1
1
VAL**
mouse-bite-5mm-slot

Yask design files

The KiCad project lives in the sanderboer/box_o_alps repository on GitHub; these links point at the commit this page was built from.

Yask: common questions

What microcontroller does the Yask use?

The Yask is built around the XIAO-RP2040, from the RP2040/RP2350 family.

How big is the Yask PCB?

The Yask measures 265.6 × 116.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yask?

39 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Yask design files?

From the sanderboer/box_o_alps repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Yask design in my own project?

Yes, under the terms of its MIT license, which sanderboer chose for the repository.

Can I test firmware for the Yask without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in box_o_alps

Similar boards