LED Earrings
sandgum·Triangulate-MS_01-Matrix-LED-Studs·PCB/LED Earrings/LED Earrings.kicad_pcb
About the LED Earrings PCB
LED Earrings is an open source PCB design by sandgum, published on GitHub. It is a 4-layer board measuring 26.3 × 16 mm, with 27 components from 10 distinct parts.
Other key parts include the MAX32660GTG+T, XCL202B331ER-G and BMA530. By type, the board carries 16 diodes, 5 capacitors, 2 ICs, 2 resistors and 1 module.
It belongs with the displays & leds, sensors and power & battery designs in this gallery.
From the project
Tiny 8x8mm ear studs (inspired by Mitxela) with 16 LEDs on each, arranged in a 4x4 matrix. Each matrix is controlled by a MAX32660 microcontroller paired with an accelerometer to react to orientation changes.
Main components on the LED Earrings
LED Earrings bill of materials (BOM)
27 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX32660GTG+T | 21-100264_90-100089_MXM | U1 |
| 1 | XCL202B331ER-G | CONV_XCL206B333CR-G | U2 |
| 1 | BMA530 | BGA6N40P3X2_120X80X59 | A1 |
| 1 | VAL** | mouse-bite-1mm-3mm | mouse-bite-1mm-3mm |
| 16 | LED | LED_0201_0603Metric | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 2 | 1UF 1uF | C_0201_0603Metric | C1, C5 |
| 1 | 10UF 10uF | C_0402_1005Metric | C2 |
| 1 | 4.7UF 4.7uF | C_0201_0603Metric | C3 |
| 1 | 100NF 100nF | C_0201_0603Metric | C4 |
| 2 | 4.7K 4.7k | R_0201_0603Metric | R1, R2 |
LED Earrings design files
The KiCad project lives in the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub; these links point at the commit this page was built from.
LED Earrings: common questions
How big is the LED Earrings PCB?
The LED Earrings measures 26.3 × 16 mm, has 4 copper layers and is 0.41 mm thick.
How many components are on the LED Earrings?
27 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LED Earrings design files?
From the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LED Earrings design in my own project?
The repository has no license, so all rights stay with sandgum. Use it as a reference, and ask the author before reusing the design.
More boards in Triangulate-MS_01-Matrix-LED-Studs
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k