LED Earrings Charging Board

sandgum·Triangulate-MS_01-Matrix-LED-Studs·PCB/LED Earrings Charging Board/LED Earrings Charging Board.kicad_pcb

LED Earrings Charging Board layout, top view — open source AVR/Arduino board by sandgum

About the LED Earrings Charging Board

LED Earrings Charging Board is an open source AVR/Arduino PCB design by sandgum, published on GitHub. It is a 4-layer board measuring 33.1 × 32.2 mm, with 89 components from 19 distinct parts.

Its main chip is the ATMEGA328P-M, from the AVR/Arduino family. Other key parts include the BQ24075RGTR, XC6206P332MR-G and MAX17048X+T10. By type, the board carries 35 resistors, 24 capacitors, 15 diodes, 6 ICs, 6 transistors and 1 crystal.

It belongs with the displays & leds, power & battery and sensors designs in this gallery.

From the project

Tiny 8x8mm ear studs (inspired by Mitxela) with 16 LEDs on each, arranged in a 4x4 matrix. Each matrix is controlled by a MAX32660 microcontroller paired with an accelerometer to react to orientation changes.

LED Earrings Charging Board, from the project README
From the project README

Main components on the LED Earrings Charging Board

LED Earrings Charging Board bill of materials (BOM)

89 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
BQ24075RGTR
U1, U2
1
ATMEGA328P-M
ATmega328P-M
U3
1
XC6206P332MR-G
XC6206P332MR-G-SOT23
U4
2
MAX17048X+T10
U12, U13
6
BSS138
Q3, Q4, Q5, Q6, Q7, Q8
1
X322516MLB4SI
Y1
1
TYPE-C-31-M-12
J1
1
SW_SPDT
SW1
6
LED
D1, D2, D3, D4, D5, D6
9
WS2812B-2020
D9, D10, D11, D12, D13, D14, D16, D17 +1
8
1UF
1uF
C1, C3, C5, C6, C57, C58, C59, C60
2
4.7UF
4.7uF
C2, C4
2
22PF
22pF
C7, C8
2
10PF
10pF
C9, C10
10
100NF
100nF
C11, C12, C13, C14, C15, C16, C17, C18 +2
4
1.5K
1.5k
R1, R2, R11, R12
25
10K
R3, R9, R22, R23, R24, R25, R26, R27 +17
4
1.18K
1.18k
R4, R5, R8, R10
2
5.1K
5.1k
R6, R7

LED Earrings Charging Board design files

The KiCad project lives in the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub; these links point at the commit this page was built from.

LED Earrings Charging Board: common questions

What microcontroller does the LED Earrings Charging Board use?

The LED Earrings Charging Board is built around the ATMEGA328P-M, from the AVR/Arduino family.

How big is the LED Earrings Charging Board?

The LED Earrings Charging Board measures 33.1 × 32.2 mm, has 4 copper layers and is 0.4 mm thick.

How many components are on the LED Earrings Charging Board?

89 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LED Earrings Charging Board design files?

From the sandgum/Triangulate-MS_01-Matrix-LED-Studs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LED Earrings Charging Board design in my own project?

The repository has no license, so all rights stay with sandgum. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LED Earrings Charging Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Triangulate-MS_01-Matrix-LED-Studs

Similar boards