Digital Analog FM Receiver

sanobertin·Digital_Analog_FM_Receiver·FM_Receiver/FM_Receiver.kicad_pcb

Digital Analog FM Receiver PCB layout, top view — open source AVR/Arduino board by sanobertin

About the Digital Analog FM Receiver PCB

Digital Analog FM Receiver is an open source AVR/Arduino PCB design by sanobertin, published on GitHub. It is a 2-layer board measuring 114.2 × 95.5 mm, with 26 components from 17 distinct parts.

Its main chip is the ARDUINO_UNO_R4_WIFI_SHIELD, from the AVR/Arduino family. Other key parts include the LM380N-8, SI4731-D60-GU and FUSB302B01MPX. By type, the board carries 13 capacitors, 4 ICs, 4 resistors, 1 module, 1 connector and 1 speaker.

It belongs with the rf & radio designs in this gallery.

From the project

Schematic and PCB Design: A carefully designed schematic and PCB will be created to ensure optimal performance and reliability of the FM receiver circuit. Arduino R4 Microcontroller: This powerful 32-bit microcontroller will be used to process the digital output and interface wit

Schematic and PCB Design: A carefully designed schematic and PCB will be created to ensure optimal performance and reliability of the FM receiver circuit. Arduino R4 Microcontroller: This powerful 32-bit microcontroller will be used to process the digital output and interface with the PC. Antenna: An efficient antenna will be designed to capture FM signals effectively.

Digital Analog FM Receiver, from the project README
From the project README

Main components on the Digital Analog FM Receiver

Digital Analog FM Receiver bill of materials (BOM)

26 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
LM380N-8
U1, U2
1
SI4731-D60-GU
Si4731-D60-GU
U3
1
FUSB302B01MPX
U4
1
ARDUINO_UNO_R4_WIFI_SHIELD
Arduino_Uno_R4_WiFi_Shield
A1
1
USB_C_RECEPTACLE_POWERONLY_6P
USB_C_Receptacle_PowerOnly_6P
J1
1
Antenna
FM_ANTENNA1
1
Speaker
LS1
1
Speaker
RS1
1
22NF
22nF
C1
2
500µ
C2, C8
4
5UF_50V
5uF_50V
C3, C5, C12, C13
1
100NF
100nF
C4
3
500UF_50V
500uF_50V
C6, C7, C11
1
4.5PF
4.5pF
C9
1
10µ
C14
2
10K
10k
R1, R2
2
5K
R5, R6

Digital Analog FM Receiver design files

The KiCad project lives in the sanobertin/Digital_Analog_FM_Receiver repository on GitHub; these links point at the commit this page was built from.

Digital Analog FM Receiver: common questions

What microcontroller does the Digital Analog FM Receiver use?

The Digital Analog FM Receiver is built around the ARDUINO_UNO_R4_WIFI_SHIELD, from the AVR/Arduino family.

How big is the Digital Analog FM Receiver PCB?

The Digital Analog FM Receiver measures 114.2 × 95.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digital Analog FM Receiver?

26 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digital Analog FM Receiver design files?

From the sanobertin/Digital_Analog_FM_Receiver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Digital Analog FM Receiver design in my own project?

The repository has no license, so all rights stay with sanobertin. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Digital Analog FM Receiver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards