7 open source boards using the FUSB302B01MPX

Real designs built with the FUSB302B01MPX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the FUSB302B01MPX

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the FUSB302B01MPX connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 4.7 kΩ).
  • The INT_N pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 51 kΩ).
  • The CC2 pins have a capacitor to GND on 2 of 5 designs, most often 470 pF (then 330 pF).
CC2pin 1, 14Connected to: A connector 100%, TPAZ1043-04F 20%, USB7016/KDX 20%
  • Capacitor to GND on 40% · 470 pF (2), 330 pF (2)
VDDpin 3, 4Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (4)
INT_Npin 5Connected to: The microcontroller 60% · not connected 20%
  • Pull-up to 3.3V on 60% · 4.7 kΩ (1), 51 kΩ (1), 2 kΩ (1)
SCLpin 6Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 80% · 2 kΩ (2), 4.7 kΩ (1), 5 kΩ (1)
SDApin 7Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 80% · 2 kΩ (2), 4.7 kΩ (1), 5 kΩ (1)
GNDpin 8, 9, 15Connected to: GND 100%
CC1pin 10, 11Connected to: A connector 100%, TPAZ1043-04F 20%, USB7016/KDX 20%
  • Capacitor to GND on 40% · 470 pF (2), 330 pF (2)
VCONNpin 12, 13Connected to: 3.3V 80% · not connected 20%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Psdaptwor by Swyter, Bottom board palmtop by ZeroPhone, D2000-mitx by mothenjoyer69 and PD Charger by electricalhog.

The FUSB302B01MPX in open source designs

The gallery holds 7 open source boards using the FUSB302B01MPX from 5 GitHub repositories; a typical one measures about 101.3 × 63.5 mm and carries around 88 components.

57% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.

The most starred is Psdaptwor by Swyter.

Parts used alongside the FUSB302B01MPX

Microcontrollers on boards using the FUSB302B01MPX

What boards using the FUSB302B01MPX are built for

FUSB302B01MPX: common questions

Where can I find a FUSB302B01MPX reference design?

Each of the 7 boards on this page is a real design using the FUSB302B01MPX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the FUSB302B01MPX SCL pin?

The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the FUSB302B01MPX.

What pull-up resistor is used on the FUSB302B01MPX SDA pin?

The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the FUSB302B01MPX.

What pull-up resistor is used on the FUSB302B01MPX INT_N pin?

The INT_N pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 51 kΩ). Counted from the KiCad layouts of 5 open source designs using the FUSB302B01MPX.

Which microcontrollers do boards using the FUSB302B01MPX use?

Most are built on RP2040/RP2350 (4), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the FUSB302B01MPX?

The median is 101.3 × 63.5 mm, and 57% are two-layer designs.

What is the most popular open source board using the FUSB302B01MPX?

By GitHub stars, Psdaptwor by Swyter, with 22 stars.

Can I simulate one of these boards using the FUSB302B01MPX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part