Car km

SantiBarrios2002·car-km·hardware/carrier/carrier.kicad_pcb

Car km PCB layout, top view — open source board by SantiBarrios2002

About the Car km PCB

Car km is an open source PCB design by SantiBarrios2002, published on GitHub. It is a 2-layer board measuring 69 × 49.9 mm, with 22 components from 18 distinct parts.

Other key parts include the TPS3808G01DBVR. By type, the board carries 8 resistors, 5 connectors, 4 capacitors, 2 diodes, 1 IC and 1 fuse.

It belongs with the displays & leds designs in this gallery.

From the project

Household car km tracker: FastAPI + SQLite service on a Raspberry Pi, with ESP32 device API

The car device is an off-the-shelf Waveshare ESP32-S3-Touch-LCD-2.8 (ESP32-S3, 2.8" touch display, RTC, Li-ion charger) mounted on a small custom carrier PCB. The carrier takes 5 V from the car's USB port, holds the module up for a few seconds after the ignition cuts power (so the ride can be saved), tells the firmware when that happens, and breaks out the PN532 NFC reader and a debug UART. Distance comes from a Vgate iCar Pro BLE OBD-II dongle, which needs no wiring.

Main components on the Car km

Car km bill of materials (BOM)

22 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS3808G01DBVR
TPS3808G01DBV
U2
1
HRO TYPE-C-31-M-12
USB-C power only
J1
1
JST S5B-PH-K-S
to PN532 (I2C)
J2
1
JST SM12B-SRSS-TB
to module J8
J3
1
UART debug
J4
1
Molex 53261-0271
to module J1 (BAT)
J5
1
PTC 1.1A hold
F1
1
SMAJ5.0A
TVS1
2
SS34
D1, D2
2
Eaton HB0820-2R5505-R class, ESR <= 0.5 ohm
5F 2.7V
C1, C4
1
10u 16V
C2
1
100n
C3
1
100k 1%
R1
1
11k3 1%
R2
1
22R 1W
R3
2
10k
R4, R5
2
5k1
R6, R7
1
4k7
R8

Car km design files

The KiCad project lives in the SantiBarrios2002/car-km repository on GitHub; these links point at the commit this page was built from.

Car km: common questions

How big is the Car km PCB?

The Car km measures 69 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Car km?

22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Car km design files?

From the SantiBarrios2002/car-km repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Car km design in my own project?

The repository has no license, so all rights stay with SantiBarrios2002. Use it as a reference, and ask the author before reusing the design.

Similar boards