21 open source boards using the TPS3808G01DBVR
Real designs built with the TPS3808G01DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Moss
metrox-eth
82 × 79 mm208 parts4LApache-2.0116ELARA antenna amplifier
MatejGomboc
200 × 100 mm110 parts4LCERN-OHL-W-2.05ESP32
Open race v2
teehee567
90.5 × 49.5 mm329 parts8LNo license4FPGA
SN-64
FantomZap
101.8 × 80.5 mm383 parts6LNo license1STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1Channel Monitor C1
AnishLanka
180 × 145 mm137 parts2LNo license1Car km
SantiBarrios2002
69 × 49.9 mm22 parts2LNo license1ESP32
Assembly preview
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00RP2040/RP2350
Open power profiler
Guiimartinho
150 × 100 mm365 parts4LMIT0STM32
Flight-Controller-V1
desanv01
104 × 104 mm310 parts6LCustom license0AIPE 48V to 24V / 1kW
FulongLi
300 × 220 mm220 parts6LNo license0RP2040/RP2350
Trinketcore
alph4345
40 × 60 mm106 parts4LNo license0ESP32
Controller
micthiesen
150 × 110 mm99 parts4LNo license0RAPS-5
itsTasos
50 × 40 mm83 parts4LNo license0Nmos ldo board
ChenSiyun1234
54 × 42 mm50 parts4LNo license0WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1RP2040/RP2350
Seizo Modular Motor Controller
gmaxdragon
100 × 100 mm53 parts2LNo license1ESP32
Carrier
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00AIPE SiC Buck Power
FulongLi
240 × 180 mm213 parts4LNo license0Capcore
alph4345
21 × 48 mm65 parts4LNo license0AIPE SiC Buck Control
FulongLi
120 × 80 mm187 parts4LNo license0
How designs wire the TPS3808G01DBVR
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the TPS3808G01DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The SENSE_5 pin has a resistor to GND on 14 of 16 designs, most often 10 kΩ (then 9.53 kΩ).
- The VDD_6 pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF (then 22 µF).
- The RESET_1 pin has a pull-up to 3.3V on 8 of 16 designs, most often 10 kΩ (then 100 kΩ).
- The SENSE_5 pin has a series resistor on 8 of 16 designs, most often 88.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESET_1pin 1 | Connected to: Signal 94% |
|
| GND_2pin 2 | Connected to: GND 94% | — |
| MR_3pin 3 | Connected to: Signal 50% · 3.3V 44% |
|
| SENSE_5pin 5 | Connected to: Signal 94% |
|
| VDD_6pin 6 | Connected to: 3.3V 63% · a signal 38% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moss by metrox-eth, ELARA antenna amplifier by MatejGomboc, Open race v2 by teehee567 and Channel Monitor C1 by AnishLanka.
The TPS3808G01DBVR in open source designs
The gallery holds 21 open source boards using the TPS3808G01DBVR from 16 GitHub repositories; a typical one measures about 104 × 80.5 mm and carries around 187 components.
86% use four copper layers or more, and 24% carry an open source license.
The most starred is Moss by metrox-eth.
Parts used alongside the TPS3808G01DBVR
Microcontrollers on boards using the TPS3808G01DBVR
What boards using the TPS3808G01DBVR are built for
TPS3808G01DBVR: common questions
Where can I find a TPS3808G01DBVR reference design?
Each of the 21 boards on this page is a real design using the TPS3808G01DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS3808G01DBVR SENSE_5 pin?
The SENSE_5 pin has a resistor to GND on 14 of 16 designs, most often 10 kΩ (then 9.53 kΩ). Counted from the KiCad layouts of 16 open source designs using the TPS3808G01DBVR.
What decoupling capacitors do designs use on the TPS3808G01DBVR VDD_6 pin?
The VDD_6 pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 16 open source designs using the TPS3808G01DBVR.
What pull-up resistor is used on the TPS3808G01DBVR RESET_1 pin?
The RESET_1 pin has a pull-up to 3.3V on 8 of 16 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 16 open source designs using the TPS3808G01DBVR.
What parts are used alongside the TPS3808G01DBVR?
The SN74LVC1G08DBVR, SN74LVC1G14DBVR, TPS22918DBVR, USBLC6-2SC6 and TMUX1511PWR appear in the most repositories here.
Which microcontrollers do boards using the TPS3808G01DBVR use?
Most are built on ESP32 (5), RP2040/RP2350 (3), STM32 (2) and WCH CH32/CH55x (1).
How big is a typical board using the TPS3808G01DBVR?
The median is 104 × 80.5 mm, and 14% are two-layer designs.
What is the most popular open source board using the TPS3808G01DBVR?
By GitHub stars, Moss by metrox-eth, with 116 stars.
Can I simulate one of these boards using the TPS3808G01DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.