PF233-RF2-LR1
sappystick·AXE2·rf2/head/out/LR1/PF233-RF2-LR1.kicad_pcb
About the PF233-RF2-LR1 PCB
PF233-RF2-LR1 is an open source PCB design by sappystick, published on GitHub. It is a 2-layer board measuring 226 × 226 mm, with 1056 components from 12 distinct parts.
From the project
Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute
Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute bay? Nothing here touches the baseline. All numbers are MODELED: noise-limited, gold spheres, no ground, no bench data.
PF233-RF2-LR1 bill of materials (BOM)
1056 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 522 | 100n | C0402 | CD1, CD2, CD3, CD4, CD5, CD6, CD7, CD8 +514 |
| 2 | GND | FLEX_LAND | JH1, JH2 |
| 2 | +5V_LED | FLEX_LAND | JH3, JH4 |
| 1 | C1_K0 | FLEX_LAND | JH5 |
| 1 | C1_D0 | FLEX_LAND | JH6 |
| 1 | C3_D0 | FLEX_LAND | JH7 |
| 1 | C3_K0 | FLEX_LAND | JH8 |
| 1 | C2_K0 | FLEX_LAND | JH9 |
| 1 | C2_D0 | FLEX_LAND | JH10 |
| 1 | C4_K0 | FLEX_LAND | JH11 |
| 1 | C4_D0 | FLEX_LAND | JH12 |
| 522 | SK9822-EC20 | SK9822EC20 | LD1, LD2, LD3, LD4, LD5, LD6, LD7, LD8 +514 |
PF233-RF2-LR1 design files
The KiCad project lives in the sappystick/AXE2 repository on GitHub; these links point at the commit this page was built from.
PF233-RF2-LR1: common questions
How big is the PF233-RF2-LR1 PCB?
The PF233-RF2-LR1 measures 226 × 226 mm, has 2 copper layers and is 0.4 mm thick.
How many components are on the PF233-RF2-LR1?
1056 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the PF233-RF2-LR1 design files?
From the sappystick/AXE2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PF233-RF2-LR1 design in my own project?
The repository has no license, so all rights stay with sappystick. Use it as a reference, and ask the author before reusing the design.
More boards in AXE2
PF233-AB1A
sappystick
40 × 40 mm40 parts6LNo license0PF233-AB1B
sappystick
40 × 40 mm28 parts6LNo license0PF233-RF2-MP1
sappystick
26 × 36 mm24 parts2LNo license0SB1R-QA-RF2
sappystick
228 × 228 mm9 parts4LNo license0SB1R-QB-RF2
sappystick
228 × 228 mm5 parts4LNo license0PF233-RF2-SH1
sappystick
228 × 228 mm3 parts2LNo license0