PF233-RF2-MP1

sappystick·AXE2·rf2/head/out/MP1/PF233-RF2-MP1.kicad_pcb

PF233-RF2-MP1 PCB layout, top view — open source board by sappystick

About the PF233-RF2-MP1 PCB

PF233-RF2-MP1 is an open source PCB design by sappystick, published on GitHub. It is a 2-layer board measuring 26 × 36 mm, with 24 components from 14 distinct parts.

Other key parts include the OPA2211AIDR. By type, the board carries 7 resistors, 5 connectors, 3 capacitors, 2 diodes and 1 IC.

From the project

Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute

Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute bay? Nothing here touches the baseline. All numbers are MODELED: noise-limited, gold spheres, no ground, no bench data.

Main components on the PF233-RF2-MP1

OPA2211AIDR

PF233-RF2-MP1 bill of materials (BOM)

24 components, 14 distinct parts.

QtyPartRefs
1
OPA2211AIDR
U1
1
COIL_A
J1
1
COIL_B
J2
1
MONO_OUT
J3
1
+5VA
J4
1
AGND
J5
6
470R CRCW2512
RA1, RA2, RA3, RB1, RB2, RB3
2
BAV199
D1, D2
2
100n
C1, C3
1
10u
C2
2
1k
R4, R6
2
24k
R5, R7
2
10k
R8, R9
1
100R
R10

PF233-RF2-MP1 design files

The KiCad project lives in the sappystick/AXE2 repository on GitHub; these links point at the commit this page was built from.

PF233-RF2-MP1: common questions

How big is the PF233-RF2-MP1 PCB?

The PF233-RF2-MP1 measures 26 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PF233-RF2-MP1?

24 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the PF233-RF2-MP1 design files?

From the sappystick/AXE2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PF233-RF2-MP1 design in my own project?

The repository has no license, so all rights stay with sappystick. Use it as a reference, and ask the author before reusing the design.

More boards in AXE2