SB1R-QB-RF2

sappystick·AXE2·rf2/head/out/SB1R_RF2/SB1R-QB-RF2.kicad_pcb

SB1R-QB-RF2 PCB layout, top view — open source board by sappystick

About the SB1R-QB-RF2 PCB

SB1R-QB-RF2 is an open source PCB design by sappystick, published on GitHub. It is a 4-layer board measuring 228 × 228 mm, with 5 components from 2 distinct parts.

From the project

Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute

Question (owner, 2026-10-29): inside the existing diameter and a 1-inch (25.4 mm) height, which layered / stacked / dense transmit-coil formation gives the most depth together with the best signature data, with the dual-quadrupole receiver (RX-Q) and a central rigid-flex compute bay? Nothing here touches the baseline. All numbers are MODELED: noise-limited, gold spheres, no ground, no bench data.

SB1R-QB-RF2 bill of materials (BOM)

5 components, 2 distinct parts.

QtyPartRefs
2
—
P1, P2
3
—
H1, H2, H3

SB1R-QB-RF2 design files

The KiCad project lives in the sappystick/AXE2 repository on GitHub; these links point at the commit this page was built from.

SB1R-QB-RF2: common questions

How big is the SB1R-QB-RF2 PCB?

The SB1R-QB-RF2 measures 228 × 228 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the SB1R-QB-RF2?

5 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the SB1R-QB-RF2 design files?

From the sappystick/AXE2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SB1R-QB-RF2 design in my own project?

The repository has no license, so all rights stay with sappystick. Use it as a reference, and ask the author before reusing the design.

More boards in AXE2