STM32-BOARD

Saroja-J·STM32-BOARD·STM32/SMT32 based hardware design.kicad_pcb

STM32-BOARD layout, top view — open source STM32 board by Saroja-J

About the STM32-BOARD

STM32-BOARD is an open source STM32 PCB design by Saroja-J, published on GitHub. It is a 2-layer board measuring 43.3 × 33.8 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the LD1117S33TR_SOT223. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

From the project

- 🔹 STM32F103C8T6 (ARM Cortex-M3) Microcontroller - 🔹 USB Micro Interface for Power & USB Communication - 🔹 3.3V LDO Power Supply (LD1117-3.3) - 🔹 SWD Programming & Debug Interface - 🔹 UART Communication Header - 🔹 I²C Expansion Header with Pull-up Resistors - 🔹 External 8 MHz Cr

- 🔹 STM32F103C8T6 (ARM Cortex-M3) Microcontroller - 🔹 USB Micro Interface for Power & USB Communication - 🔹 3.3V LDO Power Supply (LD1117-3.3) - 🔹 SWD Programming & Debug Interface - 🔹 UART Communication Header - 🔹 I²C Expansion Header with Pull-up Resistors - 🔹 External 8 MHz Crystal Oscillator - 🔹 Power Status LED - 🔹 Four Mounting Holes for Secure Installation

Main components on the STM32-BOARD

STM32-BOARD bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1
1
LD1117S33TR_SOT223
U2
1
Crystal_GND23
Y1
3
Conn_01x04_Socket
J1, J3, J4
1
USB_B_Micro
J2
1
SW_Nidec_CAS-120A1
SW1
1
LED
D1
1
120R
FB1
8
0.1uF
C1, C5, C6, C7, C8, C9, C11, C12
2
10nF
C2, C3
2
10uF
C4, C13
1
1uF
C10
1
10K
R1
2
4.7K
R2, R3
1
1K5
R4
1
220R
R5

STM32-BOARD design files

The KiCad project lives in the Saroja-J/STM32-BOARD repository on GitHub; these links point at the commit this page was built from.

STM32-BOARD: common questions

What microcontroller does the STM32-BOARD use?

The STM32-BOARD is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32-BOARD?

The STM32-BOARD measures 43.3 × 33.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-BOARD?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-BOARD design files?

From the Saroja-J/STM32-BOARD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-BOARD design in my own project?

The repository has no license, so all rights stay with Saroja-J. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-BOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards