HardLabs

Sivasankar s pathfinder

sasukeop108·Sivasankar-s-pathfinder·PCB/pathfinder.kicad_pcb

Sivasankar s pathfinder PCB layout, top view — open source RP2040/RP2350 board by sasukeop108

About the Sivasankar s pathfinder PCB

Sivasankar s pathfinder is an open source RP2040/RP2350 PCB design by sasukeop108, published on GitHub. It is a 2-layer board measuring 48.4 × 75.2 mm, with 13 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 4 diodes, 4 resistors and 1 IC.

Sivasankar s pathfinder, from the project README
From the project README

Main components on the Sivasankar s pathfinder

XIAO-RP2040-DIP

Sivasankar s pathfinder bill of materials (BOM)

13 components, 4 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
4
SW_Push
SW1, SW2, SW3, SW4
4
LED
D1, D2, D3, D4
4
R
R1, R2, R3, R4

Sivasankar s pathfinder design files

The KiCad project lives in the sasukeop108/Sivasankar-s-pathfinder repository on GitHub; these links point at the commit this page was built from.

Sivasankar s pathfinder: common questions

What microcontroller does the Sivasankar s pathfinder use?

The Sivasankar s pathfinder is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Sivasankar s pathfinder PCB?

The Sivasankar s pathfinder measures 48.4 × 75.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sivasankar s pathfinder?

13 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sivasankar s pathfinder design files?

From the sasukeop108/Sivasankar-s-pathfinder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sivasankar s pathfinder design in my own project?

The repository has no license, so all rights stay with sasukeop108. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sivasankar s pathfinder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards