308 open source boards using the XIAO-RP2040-DIP
Real designs built with the XIAO-RP2040-DIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Chaos array
ZenVega
106.4 × 71 mm35 parts2LMIT13RP2040/RP2350
CYBERPAD-01
KaiPereira
95 × 75 mm19 parts2LNo license9RP2040/RP2350
Spell tome bottom
bitshiftcrazy
69.9 × 100 mm25 parts2LCERN-OHL-S-2.07RP2040/RP2350
Keydeck
jimmydin7
61.9 × 62.7 mm9 parts2LNo license7RP2040/RP2350
Pommepad
spdidle
95 × 90 mm20 parts2LNo license5RP2040/RP2350
SniqxPad
arnav-kr
81 × 62 mm22 parts2LAGPL-3.04RP2040/RP2350
PROJECT-CLICK
amionearth
100 × 80 mm30 parts2LNo license2RP2040/RP2350
MacroPad
shourya2007mittal-hub58 × 77 mm29 parts2LNo license2RP2040/RP2350
Hackpad
SimonFrellesen
69.1 × 74.4 mm7 parts2LNo license2RP2040/RP2350
LazyPad-HACKPAD-
SamhithPola2025
71.5 × 45.6 mm7 parts2LNo license2RP2040/RP2350
Kb kapad
KavyanshKhaitan2
99.9 × 99.9 mm50 parts2LNo license1RP2040/RP2350
Numpad
Arwinplayz
90 × 120 mm38 parts2LNo license1RP2040/RP2350
Rks hackpad
rk-kaps
3.6 × 3.3 mm38 parts2LNo license1RP2040/RP2350
MacroPad
premvy
3.6 × 3.3 mm38 parts2LMIT1RP2040/RP2350
Devpad
Devansh-Singh-Parmar
99 × 99 mm34 parts2LNo license1RP2040/RP2350
Macropad v2
daaminashai
80 × 100 mm34 parts2LMIT1RP2040/RP2350
OpenDeck-RP2040-v0
Bugatsec
86.1 × 121.7 mm32 parts2LMIT1RP2040/RP2350
TejuPad
yadavtejas1947-eng
90.5 × 90 mm31 parts2LMIT1RP2040/RP2350
OmoPad
KrishnaSharma206
65.5 × 99.2 mm30 parts2LNo license1RP2040/RP2350
Froskeys
frosetrain
81 × 86.3 mm30 parts2LGPL-3.01RP2040/RP2350
HackPad-V4
sudo-apt-install-tap
60 × 81.6 mm29 parts2LGPL-3.01RP2040/RP2350
Hackpad
wetzii
100 × 100 mm28 parts2LMIT1RP2040/RP2350
Commiepad-V2
Hasnat4763
85.6 × 64.4 mm28 parts2LMIT1RP2040/RP2350
ChapPad
CHAPARII
95.8 × 85.5 mm26 parts2LNo license1RP2040/RP2350
RKs-Macropad
rk-kaps
82 × 79.6 mm26 parts2LNo license1RP2040/RP2350
Macropad
daaminashai
81 × 86 mm25 parts2LNo license1RP2040/RP2350
Hackypady
Az154za
88.1 × 71.4 mm24 parts2LNo license1RP2040/RP2350
MyPad
isaaclau888
67 × 99.5 mm21 parts2LNo license1RP2040/RP2350
MultiPad
Darbyshire64
70.5 × 94 mm20 parts2LNo license1RP2040/RP2350
Piperpad
PriyanshuPz
61 × 81 mm19 parts2LNo license1RP2040/RP2350
Macroboard v2
MoeezAnwar
63.6 × 42.5 mm15 parts2LMIT1RP2040/RP2350
MemoryPAD
SyedIhteshamuddin
91.5 × 50.5 mm13 parts2LNo license1RP2040/RP2350
Arc-4
Sameer-Kulhari
80.9 × 59.5 mm13 parts2LNo license1RP2040/RP2350
Leopad
jai-git4208
121.4 × 42.9 mm12 parts4LNo license1RP2040/RP2350
DROPDECK
avadsariya0-coder
117.5 × 68.8 mm10 parts2LMIT1RP2040/RP2350
TITAN-BLINKER
avadsariya0-coder
51.5 × 63.6 mm10 parts2LMIT1
How designs wire the XIAO-RP2040-DIP
Read from the KiCad layouts of 285 open source designs, one per repository: what each pin of the XIAO-RP2040-DIP connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 13 | Connected to: GND 92% | — |
| VBUSpin 14 | Connected to: 5V 62% · not connected 34% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ccc macropad by ZenVega, CYBERPAD-01 by KaiPereira, Spell tome bottom by bitshiftcrazy and Irl raver by hackclub.
The XIAO-RP2040-DIP in open source designs
The gallery holds 308 open source boards using the XIAO-RP2040-DIP from 295 GitHub repositories; a typical one measures about 79.9 × 74.7 mm and carries around 16 components.
100% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is Chaos array by ZenVega.
Parts used alongside the XIAO-RP2040-DIP
Microcontrollers on boards using the XIAO-RP2040-DIP
What boards using the XIAO-RP2040-DIP are built for
XIAO-RP2040-DIP: common questions
Where can I find a XIAO-RP2040-DIP reference design?
Each of the 308 boards on this page is a real design using the XIAO-RP2040-DIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the XIAO-RP2040-DIP?
The XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-DIP and XIAO-ESP32-C6-SMD appear in the most repositories here.
Which microcontrollers do boards using the XIAO-RP2040-DIP use?
Most are built on RP2040/RP2350 (306), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the XIAO-RP2040-DIP?
The median is 79.9 × 74.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the XIAO-RP2040-DIP?
By GitHub stars, Chaos array by ZenVega, with 13 stars.
Can I simulate one of these boards using the XIAO-RP2040-DIP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.