Secdb---Universal-Component-Tester
Saurav7140·Secdb---Universal-Component-Tester·07_KiCad/SECDB_Component_Tester.kicad_pcb
About the Secdb---Universal-Component-Tester PCB
Secdb---Universal-Component-Tester is an open source STM32 PCB design by Saurav7140, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 75 mm, with 89 components from 49 distinct parts.
Its main chip is the STM32F401CCU6, from the STM32 family. Other key parts include the TMUX1104DGSR, TMUX1108PWR, OPA391DBVR, AP2112K-3.3TRG1 and USBLC6-2SC6. By type, the board carries 42 resistors, 22 capacitors, 6 ICs, 6 connectors, 4 switches and 2 diodes.
From the project
STM32F401-based universal component tester for resistors, capacitors, diodes, and known-pinout BJTs, with LTspice verification and KiCad PCB design.
An STM32-based diagnostic platform for resistors, capacitors, diodes, and known-pinout BJTs.
Description · Features · Quickstart · About
The Smart Electronic Component Diagnostic Board (SECDB) is a final-year ECE project built to identify and evaluate disconnected, unpowered electronic components. It combines an STM32F401CCU6, a protected shared analog front end, automatic measurement ranges, calibration channels, and rule-based diagnostic firmware.

Main components on the Secdb---Universal-Component-Tester
Secdb---Universal-Component-Tester bill of materials (BOM)
89 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401CCU6 STMicroelectronics | QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm_ThermalVias | U1 |
| 1 | TMUX1104DGSR Texas Instruments | MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | TMUX1108PWR Texas Instruments | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | OPA391DBVR Texas Instruments | SOT-23-5 | U4 |
| 1 | AP2112K-3.3TRG1 Diodes Incorporated | SOT-23-5 | U5 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U6 |
| 1 | ABLS-8.000MHZ-B2-T Abracon | Crystal_SMD_HC49-SD | Y1 |
| 1 | USB4105-GF-A GCT | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | 1x5 2.54mm pin header SWD 1x5 Generic | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Turned-pin 1x2 female R-C SOCKET Generic | PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Turned-pin 1x2 female DIODE A-B Generic | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Turned-pin 1x3 female BJT E-B-C Generic | PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | 2.54mm 1x8 female socket ST7735 1x8 BOARD HEADER Generic | PinSocket_1x08_P2.54mm_Vertical | J6 |
| 2 | TPD4E1B06DCKR Texas Instruments | SOT-363_SC-70-6 | ESD1, ESD2 |
| 1 | MF-MSMF050-2 Bourns | Fuse_1812_4532Metric | F1 |
| 1 | 6x6mm tactile RESET Generic | SW_PUSH_6mm | SW1 |
| 1 | 6x6mm tactile MODE Generic | SW_PUSH_6mm | SW2 |
| 1 | 6x6mm tactile UP Generic | SW_PUSH_6mm | SW3 |
| 1 | 6x6mm tactile DOWN Generic | SW_PUSH_6mm | SW4 |
| 1 | 0603 green LED STATUS GREEN Generic | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMBJ5.0A-TR STMicroelectronics | D_SMB | D1 |
| 1 | B5819W-7-F Diodes Incorporated | D_SOD-123 | D2 |
| 2 | BLM21PG221SN1D Murata | L_0805_2012Metric | FB1, FB2 |
| 1 | 0805 10uF X7R >=10V 10uF X7R Generic | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0603 100nF X7R >=10V 100nF X7R Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 0805 10uF X7R >=6.3V 10uF X7R Generic | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0603 100nF X7R >=6.3V 100nF X7R Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 11 | 0603 100nF X7R 100nF X7R Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8, C9, C11, C15, C17 +3 |
| 2 | 0603 1uF X7R 1uF X7R Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C20 |
| 1 | 0805 4.7uF X7R 4.7uF X7R low-ESR Generic | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 2 | 0603 30pF C0G 30pF C0G Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14 |
| 1 | 0603 1nF C0G 1nF C0G 5% Generic | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 0805 10uF X5R 10uF X5R Generic | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 2 | 0603 5.1k 1% 5.1k 1% Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 0603 1k 1% 1k 1% Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R12 |
| 2 | 0603 22R 1% 22R 1% Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 1 | 0603 0R 0R FIT Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 5 | 0603 10k 1% 10k 1% Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10, R11 |
| 7 | 0603 100k 1% 100k 1% Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R15, R16, R17, R18, R19 |
| 2 | 1k 0.1% 25ppm Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R23 |
| 4 | 10k 0.1% 25ppm Matched thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R33, R34, R35 |
| 1 | 100k 0.1% 25ppm Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 330R 0.1% Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 8 | 1k 1% Thin film | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R27, R28, R29, R30, R31, R32 |
| 3 | 1k 0.1% Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36, R37, R40 |
| 1 | 100R 1% Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38 |
| 1 | 1M 0.1% Thin film | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39 |
| 1 | 100R 1% Thin film | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41 |
| 1 | 0603 0 ohm link 0R FIT Generic | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42 |
Secdb---Universal-Component-Tester design files
The KiCad project lives in the Saurav7140/Secdb---Universal-Component-Tester repository on GitHub; these links point at the commit this page was built from.
Secdb---Universal-Component-Tester: common questions
What microcontroller does the Secdb---Universal-Component-Tester use?
The Secdb---Universal-Component-Tester is built around the STM32F401CCU6, from the STM32 family.
How big is the Secdb---Universal-Component-Tester PCB?
The Secdb---Universal-Component-Tester measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Secdb---Universal-Component-Tester?
89 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Secdb---Universal-Component-Tester design files?
From the Saurav7140/Secdb---Universal-Component-Tester repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Secdb---Universal-Component-Tester design in my own project?
Yes, under the terms of its MIT license, which Saurav7140 chose for the repository.
Can I test firmware for the Secdb---Universal-Component-Tester without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k