5 open source boards using the STM32F401CCU6

Real designs built with the STM32F401CCU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32F401CCU6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F401CCU6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The PH0 pin has a capacitor to GND on 5 of 5 designs, most often 10 pF (then 22 pF).
  • The PH0 pin has a crystal on 5 of 5 designs, most often 16 MHz.
  • The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 nF).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (13), 1 µF (3), 10 µF (3)
PC13pin 2Connected to: Not connected 100%
PC14pin 3Connected to: Not connected 80% · a signal 20%
PC15pin 4Connected to: Not connected 80% · a signal 20%
PH0pin 5Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 pF (3), 22 pF (1), 30 pF (1)
  • Crystal on 100% · 16 MHz (3)
PH1pin 6Connected to: Signal 100%
  • Capacitor to GND on 80% · 10 pF (3), 22 pF (1)
  • Crystal on 80% · 16 MHz (3)
NRSTpin 7Connected to: A connector 80%
  • Capacitor to GND on 80% · 100 nF (4)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
VSSApin 8Connected to: GND 100%
VREF+pin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 1 µF (4), 10 nF (4), 4.7 µF (2)
PA2pin 12Connected to: Signal 100%
  • Series resistor on 80% · 470 Ω (2), 10 kΩ (1), 22 Ω (1)
PA3pin 13Connected to: Signal 100%
  • Series resistor on 80% · 470 Ω (2), 10 kΩ (1), 22 Ω (1)
PA4pin 14Connected to: W25Q32JVSS 60%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
PB2pin 20Connected to: Not connected 60% · a signal 40%
PB10pin 21Connected to: A connector 60%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2)
VCAP1pin 22Connected to: Signal 80% · VDD 20%
  • Capacitor to GND on 100% · 2.2 µF (3), 100 nF (2), 4.7 µF (1)
VSSpin 23, 35, 47, 49Connected to: GND 100%
VDDpin 24, 36, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (32), 1 µF (3), 10 µF (3)
PB12pin 25Connected to: Not connected 80% · a signal 20%
PB13pin 26Connected to: Not connected 60% · a signal 40%
PB3pin 39Connected to: A connector 40% · not connected 40%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2)
PB4pin 40Connected to: Not connected 60% · a signal 40%
PB5pin 41Connected to: BNO055 60%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
PB6pin 42Connected to: PA1616S 40% · not connected 20%
  • Series resistor on 40% · 10 kΩ (2)
PB7pin 43Connected to: A connector 80%, BNO055 60%, BMP280 40%
  • Pull-up to 3.3V on 60% · 4.7 kΩ (2), 1.5 kΩ (1)
BOOT0pin 44Connected to: Signal 60% · not connected 40%
  • Resistor to GND on 40% · 10 kΩ (2)
PB8pin 45Connected to: BNO055 60%, a connector 60%, BMP280 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2)
PB9pin 46Connected to: Not connected 80% · a signal 20%

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ARES FC by explosion33, RCS Hardware by explosion33, AWS PROJECT by marydovika and QUADCOPTER by Riskerx.

The STM32F401CCU6 in open source designs

The gallery holds 5 open source boards using the STM32F401CCU6 from 5 GitHub repositories; a typical one measures about 57.2 × 57.2 mm and carries around 81 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is ARES FC by explosion33.

Parts used alongside the STM32F401CCU6

Microcontrollers on boards using the STM32F401CCU6

What boards using the STM32F401CCU6 are built for

STM32F401CCU6: common questions

Where can I find a STM32F401CCU6 reference design?

Each of the 5 boards on this page is a real design using the STM32F401CCU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F401CCU6 VBAT pin?

The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F401CCU6.

How is the STM32F401CCU6 PH0 pin connected?

The PH0 pin has a capacitor to GND on 5 of 5 designs, most often 10 pF (then 22 pF). Counted from the KiCad layouts of 5 open source designs using the STM32F401CCU6.

What decoupling capacitors do designs use on the STM32F401CCU6 VREF+ pin?

The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the STM32F401CCU6.

What parts are used alongside the STM32F401CCU6?

The AMS1117-3.3, BNO055, W25Q32JVSS, BMP280 and PA1616S appear in the most repositories here.

Which microcontrollers do boards using the STM32F401CCU6 use?

Most are built on STM32 (4) and ESP32 (1).

How big is a typical board using the STM32F401CCU6?

The median is 57.2 × 57.2 mm, and 80% are two-layer designs.

What is the most popular open source board using the STM32F401CCU6?

By GitHub stars, ARES FC by explosion33, with 1 stars.

Can I simulate one of these boards using the STM32F401CCU6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part