HardLabs

VoidLens-DIY-VR-Headset-Prototype1

scattercat-123·VoidLens-DIY-VR-Headset-Prototype1·PCB/KiCad/VoidLens VR PCB.kicad_pcb

VoidLens-DIY-VR-Headset-Prototype1 PCB layout, top view — open source AVR/Arduino board by scattercat-123

About the VoidLens-DIY-VR-Headset-Prototype1 PCB

VoidLens-DIY-VR-Headset-Prototype1 is an open source AVR/Arduino PCB design by scattercat-123, published on GitHub. It is a 2-layer board measuring 88.2 × 45.5 mm, with 15 components from 10 distinct parts.

Its main chip is the Arduino_Pro_Micro (sparkfun pro micro), from the AVR/Arduino family. Other key parts include the LM3940IT-3.3/NOPB and NRF24L01_Breakout. By type, the board carries 5 ICs, 3 capacitors, 3 resistors, 2 connectors, 1 switch and 1 diode.

From the project

Here, I made a DIY VR Headset Compatble with SteamVR. This was inspired by the HadesVR.

Random egg 🥚: Okay i dint think someone would really look at all of this scrolling all the way down 🙄 here is a suprise!

VoidLens-DIY-VR-Headset-Prototype1, from the project README
From the project README

Main components on the VoidLens-DIY-VR-Headset-Prototype1

LM3940IT-3.3/NOPBNRF24L01_Breakout

VoidLens-DIY-VR-Headset-Prototype1 bill of materials (BOM)

15 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM3940IT-3.3/NOPB
LM3940IT-3.3_NOPB
IC1
2
NRF24L01_Breakout
U1, U4
1
~
U2
1
~
U3
1
1x2
J1
1
2 pin conn for powering display
J2
1
~
韩国韩荣
SW1
1
LED_ARGB
D1
3
100uF
C1, C2, C3
3
120Ω
R1, R2, R3

VoidLens-DIY-VR-Headset-Prototype1 design files

The KiCad project lives in the scattercat-123/VoidLens-DIY-VR-Headset-Prototype1 repository on GitHub; these links point at the commit this page was built from.

VoidLens-DIY-VR-Headset-Prototype1: common questions

What microcontroller does the VoidLens-DIY-VR-Headset-Prototype1 use?

The VoidLens-DIY-VR-Headset-Prototype1 is built around the Arduino_Pro_Micro (sparkfun pro micro), from the AVR/Arduino family.

How big is the VoidLens-DIY-VR-Headset-Prototype1 PCB?

The VoidLens-DIY-VR-Headset-Prototype1 measures 88.2 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the VoidLens-DIY-VR-Headset-Prototype1?

15 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the VoidLens-DIY-VR-Headset-Prototype1 design files?

From the scattercat-123/VoidLens-DIY-VR-Headset-Prototype1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the VoidLens-DIY-VR-Headset-Prototype1 design in my own project?

The repository has no license, so all rights stay with scattercat-123. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VoidLens-DIY-VR-Headset-Prototype1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards