STM32F030K6Tx Breakout

schilkp·STM32F030K6Tx_Breakout·Kicad/STM32F030K6Tx_Breakout/STM32F030K6Tx_Breakout.kicad_pcb

STM32F030K6Tx Breakout layout, top view — open source STM32 board by schilkp

About the STM32F030K6Tx Breakout

STM32F030K6Tx Breakout is an open source STM32 PCB design by schilkp, published on GitHub under the MIT license. It is a 2-layer board measuring 35.6 × 43.2 mm, with 23 components from 16 distinct parts.

Its main chip is the STM32F030K6Tx, from the STM32 family. By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 3 diodes, 1 IC and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A very simple breakout board for the STM32F030K6Tx MCU.

A very simple breakout board for the STM32F030K6Tx MCU.

https://github.com/TheSchilk/STM32F030K6Tx_Breakout

Besides SWD, 2 LEDs, space for a crystal and other supporting circuitry, there are bells and whistles.

I did however aim to expose as much functionality of the STM as possible: The crystal is optional and the IO can be exposed with two jumpers if needed. Also the VDDA Supply can be separated from VDD if a separate supply is wanted.

STM32F030K6Tx Breakout, from the project README
From the project README

Main components on the STM32F030K6Tx Breakout

STM32F030K6Tx Breakout bill of materials (BOM)

23 components, 16 distinct parts.

QtyPartRefs
1
STM32F030K6Tx
U1
1
Crystal
Y1
1
BREAKOUT_L
J1
1
ARM_SWD
J2
1
BREAKOUT_R
J3
1
PWR
J4
1
RST
SW1
2
LED1
D1, D3
1
LED2
D2
2
c_y
C1, C2
3
0u1
C3, C6, C8
1
10n
C4
1
1u
C5
1
4u7
C7
2
10K
R1, R2
3
1K
R3, R4, R5

STM32F030K6Tx Breakout design files

The KiCad project lives in the schilkp/STM32F030K6Tx_Breakout repository on GitHub; these links point at the commit this page was built from.

STM32F030K6Tx Breakout: common questions

What microcontroller does the STM32F030K6Tx Breakout use?

The STM32F030K6Tx Breakout is built around the STM32F030K6Tx, from the STM32 family.

How big is the STM32F030K6Tx Breakout?

The STM32F030K6Tx Breakout measures 35.6 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F030K6Tx Breakout?

23 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32F030K6Tx Breakout design files?

From the schilkp/STM32F030K6Tx_Breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the STM32F030K6Tx Breakout design in my own project?

Yes, under the terms of its MIT license, which schilkp chose for the repository.

Can I test firmware for the STM32F030K6Tx Breakout without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards