Dropbot-40-channel-HV-switching board.
sci-bots·dropbot-40-channel-HV-switching-board.kicad
About the Dropbot-40-channel-HV-switching board.
Dropbot-40-channel-HV-switching board. is an open source AVR/Arduino PCB design by sci-bots, published on GitHub under the Custom license license. It is a board measuring 84 × 92 mm, with 204 components from 22 distinct parts.
Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 74HC595A and W25Q64FV. By type, the board carries 126 resistors, 16 capacitors, 7 ICs, 7 connectors, 5 inductors and 1 crystal.
From the project
High-voltage switching board for the DropBot v3 digital microfluidics platform
The high-voltage switching boards control the on/off state of electrodes in the [DropBot system][dropbot]. Each board controls 40-channels and multiple boards can be daisy-chained together.
For more information, please visit https://sci-bots.com
This design is open-source hardware released under a [Creative Commons Attribution-ShareAlike licence][cc-by-sa].
[dropbot]: https://github.com/sci-bots/dropbot-v3 [sci-bots]: https://sci-bots.com/ [cc-by-sa]: http://creativecommons.org/licenses/by-sa/3.0

Main components on the Dropbot-40-channel-HV-switching board.
Dropbot-40-channel-HV-switching board. bill of materials (BOM)
204 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 74HC595A | SO16E | U1, U2, U3, U4, U5 |
| 1 | W25Q64FV | SOIC-8-N | U6 |
| 1 | ATMEGA328P-AU | TQFP-32_7x7mm_Pitch0.8mm | U7 |
| 1 | RESONATOR | CSTCE_G15C | Y1 |
| 1 | CONN_01X06 | Pin_Header_Angled_1x06 | P1 |
| 1 | CONN_01X06 | Pin_Header_Straight_2x03 | P2 |
| 4 | CONN_01X01 | 1pin | P3, P4, P5, P6 |
| 1 | TFM-125-02-X-DH | TFM-125-02-X-DH | P7 |
| 40 | AQW214 | DIP-8_SMD | CH0, CH1, CH2, CH3, CH4, CH5, CH6, CH7 +32 |
| 1 | JUMPER | R_0805 | JP1 |
| 1 | +3.3V_PWR | LED_0805 | DS1 |
| 5 | FERRITE | R_0805 | FB1, FB2, FB3, FB4, FB5 |
| 11 | 0.1uF | C_0805 | C1, C3, C5, C6, C8, C9, C10, C11 +3 |
| 2 | 33uF | SM2917 | C2, C4 |
| 1 | 0.01uF | C_0805 | C7 |
| 2 | 150pF | C_0805 | C14, C15 |
| 40 | 4.75k | R_0805 | R1, R6, R7, R12, R13, R18, R19, R24 +32 |
| 80 | 220 | R_0805 | R2, R3, R4, R5, R8, R9, R10, R11 +72 |
| 1 | 10k | R_0805 | R43 |
| 1 | 1k | R_0805 | R45 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 51 | R_0805 | R99, R100 |
| 2 | 150 | R_0805 | R125, R126 |
Dropbot-40-channel-HV-switching board. design files
The KiCad project lives in the sci-bots/dropbot-40-channel-HV-switching-board.kicad repository on GitHub; these links point at the commit this page was built from.
Dropbot-40-channel-HV-switching board.: common questions
What microcontroller does the Dropbot-40-channel-HV-switching board. use?
The Dropbot-40-channel-HV-switching board. is built around the ATMEGA328P-AU, from the AVR/Arduino family.
How big is the Dropbot-40-channel-HV-switching board.?
The Dropbot-40-channel-HV-switching board. measures 84 × 92 mm and is 1.6002 mm thick.
How many components are on the Dropbot-40-channel-HV-switching board.?
204 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dropbot-40-channel-HV-switching board. design files?
From the sci-bots/dropbot-40-channel-HV-switching-board.kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dropbot-40-channel-HV-switching board. design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Dropbot-40-channel-HV-switching board. without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k