Power monitor protection

ScottGibb·Home-Power-Monitor-Hardware·power_monitor_protection/power_monitor_protection.kicad_pcb

Power monitor protection

About the Power monitor protection PCB

Power monitor protection is an open source PCB design by ScottGibb, published on GitHub. It is a 2-layer board, with 10 components from 6 distinct parts.

Other key parts include the ADuM1201AR and B0503S-1WR3. By type, the board carries 6 capacitors, 2 ICs and 2 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

The hardware schematics for the Home Power Monitor Application

This repository contains the KiCad hardware designs for the Home Power Monitor project. It currently consists of two hardware components:

- An LCD Control Unit - An Isolated Conversion Board between the Host Processor and the JSY-MK-194 Power Sensor

For more details on the prototype build, see the prototyping notes.

The lcdcontrolunit project is the control board for the display section of the power monitor. The schematic is built around a WC1602A 16x2 character LCD and is designed as a board for the display assembly. The unit contains the screen along with four button inputs, one of which…

Main components on the Power monitor protection

Power monitor protection bill of materials (BOM)

10 components, 6 distinct parts.

QtyPartRefs
1
ADuM1201AR
U1
1
B0503S-1WR3
U3
1
Conn_01x05_Socket
J1
1
Conn_01x04_Socket
J2
4
100nF
C1, C2, C3, C4
2
10uF
C5, C6

Power monitor protection design files

The KiCad project lives in the ScottGibb/Home-Power-Monitor-Hardware repository on GitHub; these links point at the commit this page was built from.

Power monitor protection: common questions

How big is the Power monitor protection PCB?

The Power monitor protection has 2 copper layers and is 1.6 mm thick.

How many components are on the Power monitor protection?

10 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Power monitor protection design files?

From the ScottGibb/Home-Power-Monitor-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Power monitor protection design in my own project?

The repository has no license, so all rights stay with ScottGibb. Use it as a reference, and ask the author before reusing the design.

Similar boards