15 open source boards using the ADuM1201AR

Real designs built with the ADuM1201AR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the ADuM1201AR

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ADuM1201AR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD1 pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF).
  • The VDD2 pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF.
VDD1pin 1Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (7), 10 µF (2)
GND1pin 4Connected to: GND 90%
GND2pin 5Connected to: GND 80% · a signal 20%
VDD2pin 8Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 70% · 100 nF (7)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hcv by chrkir, EQMOD DIRECT Isolated by claudioarena, Digital by Synthron and OAM-KNX2HovalGateway by Blizzard26.

The ADuM1201AR in open source designs

The gallery holds 15 open source boards using the ADuM1201AR from 11 GitHub repositories; a typical one measures about 78 × 60 mm and carries around 36 components.

73% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is Hcv by chrkir.

Parts used alongside the ADuM1201AR

Microcontrollers on boards using the ADuM1201AR

What boards using the ADuM1201AR are built for

ADuM1201AR: common questions

Where can I find a ADuM1201AR reference design?

Each of the 15 boards on this page is a real design using the ADuM1201AR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADuM1201AR VDD1 pin?

The VDD1 pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the ADuM1201AR.

What decoupling capacitors do designs use on the ADuM1201AR VDD2 pin?

The VDD2 pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the ADuM1201AR.

Which microcontrollers do boards using the ADuM1201AR use?

Most are built on STM32 (5), ESP32 (4), AVR/Arduino (2) and RP2040/RP2350 (1).

How big is a typical board using the ADuM1201AR?

The median is 78 × 60 mm, and 73% are two-layer designs.

What is the most popular open source board using the ADuM1201AR?

By GitHub stars, Hcv by chrkir, with 5 stars.

Can I simulate one of these boards using the ADuM1201AR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part