MHzDisplay 0.39

scrapcomputing·MHzDisplay_0.39·kicad/MHzDisplayBlaster_0.39.kicad_pcb

MHzDisplay 0.39 PCB layout, top view — open source board by scrapcomputing

About the MHzDisplay 0.39 PCB

MHzDisplay 0.39 is an open source PCB design by scrapcomputing, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 38.9 × 31.2 mm, with 8 components from 6 distinct parts.

Other key parts include the SC39-11GWA. By type, the board carries 5 connectors, 2 ICs and 1 resistor.

It belongs with the displays & leds and retro computing designs in this gallery.

From the project

A 0.39" LED Turbo Display for a vintage AT case

A MHz Turbo LED display with 2x smaller 0.39" digits (12.8mm x 9.7mm x 7.0mm common cathode like the HD1107G). These are smaller than the more common 0.56" display like the TD-37S or the K568.

I don't know the model number of the display that this is compatible with. If you do know please let me know!

As all similar displays, it is powered by 5V DC (pins +5V, G) and it can display a Turbo and a non-Turbo number, depending on the state of the Turbo switch (pins L C H, Low Common High). It also drives the Turbo LED accordingly (pins T- and T+).

MHzDisplay 0.39, from the project README
From the project README

Main components on the MHzDisplay 0.39

MHzDisplay 0.39 bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
2
SC39-11GWA
U1, U2
1
Conn_02x13 DigitRHS
J1
1
Conn_02x14 DigitLHS
J2
2
Conn_02x03_Odd_Even
J3, J5
1
Conn_01x07
J4
1
100 Ohm
R1

MHzDisplay 0.39 design files

The KiCad project lives in the scrapcomputing/MHzDisplay_0.39 repository on GitHub; these links point at the commit this page was built from.

MHzDisplay 0.39: common questions

How big is the MHzDisplay 0.39 PCB?

The MHzDisplay 0.39 measures 38.9 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MHzDisplay 0.39?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the MHzDisplay 0.39 design files?

From the scrapcomputing/MHzDisplay_0.39 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MHzDisplay 0.39 design in my own project?

Yes, under the terms of its GPL-2.0 license, which scrapcomputing chose for the repository.

Similar boards