Opamp Motor Position Control

sdp8483·pl_test_pcb·opamp_motor_position/pcb/opamp_motor_position.kicad_pcb

Opamp Motor Position Control PCB layout, top view — open source board by sdp8483

About the Opamp Motor Position Control PCB

Opamp Motor Position Control is an open source PCB design by sdp8483, published on GitHub under the MIT license. It is a 2-layer board measuring 75.1 × 51.3 mm, with 18 components from 10 distinct parts.

Other key parts include the LM358. By type, the board carries 4 connectors, 4 capacitors, 3 resistors, 2 transistors, 1 IC and 1 module.

From the project

Various Test Circuits for all Projects

Directory structure for starting a basic project. Originally based off Hackaday article: https://hackaday.com/2017/05/18/kicad-best-practises-library-management/

Main components on the Opamp Motor Position Control

Opamp Motor Position Control bill of materials (BOM)

18 components, 10 distinct parts.

Qty	Part	Footprint	Refs
1	LM358	DIP-8_W7.62mm_LongPads	U1
1	Motor_DC	Altech_AK100_1x02_P5.00mm	M1
1	2N6037	TO-126-3_Vertical	Q1
1	2N6036	TO-126-3_Vertical	Q2
4	Conn_01x02	PinHeader_1x02_P2.54mm_Vertical	J1, J2, J3, J4
3	100k	Potentiometer_Alps_RK163_Single_Horizontal	RV1, RV2, RV3
2	2200uF	CP_Radial_D12.5mm_P5.00mm	C1, C2
2	0.1uF	C_Rect_L7.0mm_W2.0mm_P5.00mm	C3, C4
2	5k6	R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal	R1, R2
1	R	R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal	R3

Opamp Motor Position Control design files

The KiCad project lives in the sdp8483/pl_test_pcb repository on GitHub; these links point at the commit this page was built from.

Opamp Motor Position Control: common questions

How big is the Opamp Motor Position Control PCB?

The Opamp Motor Position Control measures 75.1 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Opamp Motor Position Control?

18 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Opamp Motor Position Control design files?

From the sdp8483/pl_test_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Opamp Motor Position Control design in my own project?

Yes, under the terms of its MIT license, which sdp8483 chose for the repository.

More boards in pl_test_pcb