Braids through hole V1.1 CONTROL
About the Braids through hole V1.1 CONTROL PCB
Braids through hole V1.1 CONTROL is an open source PCB design by sebastianbeyer, published on GitHub. It is a board measuring 87 × 96 mm, with 45 components from 13 distinct parts.
Other key parts include the 74HC595N and LM4040-10.0. By type, the board carries 31 resistors, 4 transistors, 4 capacitors, 3 ICs and 1 switch.
From the project
This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl. It has only 12 bits resolution in the output because the chip is easier to work with and cheaper.
This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl. It has only 12 bits resolution in the output because the chip is easier to work with and cheaper.
This project is so far only different to the soundforce version in that I removed the 3.5mm jack sockets and replaced them with molex connectors to get them connected to the larger 6.3mm jack sockets that KOSMO uses. And I made the larger KOSMO panel.
Main components on the Braids through hole V1.1 CONTROL
Braids through hole V1.1 CONTROL bill of materials (BOM)
45 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC595N | DIL16 | IC1, IC2 |
| 1 | LM4040-10.0 | TO127P254X495-3 | IC8 |
| 4 | 2N3904 | TO92-CBE | Q1, Q2, Q3, Q4 |
| 2 | KINGBRIGHT-PDC54-11 | PDC54 | DISP1, DISP2 |
| 1 | EC12E_SW | ALPS_EC12E_SW | SW1 |
| 4 | 100n | C025-024X044 | C1, C2, C26, C31 |
| 4 | 1k | 0204_5 | R1, R2, R3, R11 |
| 14 | 100 | 0204_5 | R4, R5, R6, R7, R8, R9, R10, R12 +6 |
| 6 | 10kB | ALPS_POT_VERTICAL_PS | R19, R20, R21, R36, R37, R38 |
| 2 | 100k | 0204_5 | R24, R48 |
| 3 | 200k | 0204_5 | R28, R32, R40 |
| 1 | 120k | 0204_5 | R39 |
| 1 | 330 | 0204_5 | R51 |
Braids through hole V1.1 CONTROL design files
The KiCad project lives in the sebastianbeyer/KOSMO_braids repository on GitHub; these links point at the commit this page was built from.
Braids through hole V1.1 CONTROL: common questions
How big is the Braids through hole V1.1 CONTROL PCB?
The Braids through hole V1.1 CONTROL measures 87 × 96 mm and is 1.6 mm thick.
How many components are on the Braids through hole V1.1 CONTROL?
45 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Braids through hole V1.1 CONTROL design files?
From the sebastianbeyer/KOSMO_braids repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Braids through hole V1.1 CONTROL design in my own project?
The repository has no license, so all rights stay with sebastianbeyer. Use it as a reference, and ask the author before reusing the design.
