HardLabs

Sensor - MA600A

sedlak477·owl-hardware·pcb/sensor/ma600a/src/Sensor - MA600A.kicad_pcb

Sensor - MA600A PCB layout, top view — open source RP2040/RP2350 board by sedlak477

About the Sensor - MA600A PCB

Sensor - MA600A is an open source RP2040/RP2350 PCB design by sedlak477, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 22.3 × 20 mm, with 4 components from 4 distinct parts.

Its main chip is the 781715006, from the RP2040/RP2350 family. Other key parts include the MA600AGQE-0000-Z. By type, the board carries 2 capacitors, 1 IC and 1 connector.

It belongs with the iot & wireless, sensors and robotics & motion designs in this gallery.

From the project

Hardware design files and build instructions for the OWL platform

ENIG surface finish is recommended. Minimum track width and clearance are 0.15 mm, minimum drill is 0.25 mm (controller) or 0.3 mm (stator, sensor).

The easiest way to get the files is the latest release: owl--jlcpcb.zip has the JLCPCB files and owl--generic.zip the generic files and schematics, each with one folder per board.

Order each board (controller, stator, sensor-ma600a) separately. Download and unzip owl--jlcpcb.zip, then for each board:

Main components on the Sensor - MA600A

MA600AGQE-0000-Z

Sensor - MA600A bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MA600AGQE-0000-Z
MA600A
Monolithic Power Systems
U2
1
781715006
Molex
J1
1
CC0603KRX7R9BB104
100n
Yageo
C1
1
CL10A105KB8NNNC
1u
Samsung Electro-Mechanics
C2

Sensor - MA600A design files

The KiCad project lives in the sedlak477/owl-hardware repository on GitHub; these links point at the commit this page was built from.

Sensor - MA600A: common questions

What microcontroller does the Sensor - MA600A use?

The Sensor - MA600A is built around the 781715006, from the RP2040/RP2350 family.

How big is the Sensor - MA600A PCB?

The Sensor - MA600A measures 22.3 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor - MA600A?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensor - MA600A design files?

From the sedlak477/owl-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sensor - MA600A design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which sedlak477 chose for the repository.

Can I test firmware for the Sensor - MA600A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in owl-hardware

Similar boards