G5Dot
G5Dot is an open source PCB design by septentrio-gnss: a 4-layer, 22 × 30 mm board with 16 components (8 distinct parts). It is built around the MOSAIC-G5-P3H. Filed under rf & radio.
G5Dot: Is an M.2 Key A+E open source HW for mosaic G5 GNSS modules of Septentrio usable with NVIDIA and other computers
This open source project is derived from the following original project located here
* Interface, Protocol & Electrical Specifications
The design is based on the mosaic-G5 GNSS receiver, which supports multiple satellite systems and enables centimetre-level positioning accuracy. This open-source board was originally designed by ANavS GmbH. ## Who is Septentrio?
Built around
Parts list
16 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOSAIC-G5-P3H mosaic-G5-GENERIC | mosaic-G5-GENERIC-Footprint | U1 |
| 2 | NTK3043NT1G | ONSC-SOT-723-3-631AA-01_V | Q1, Q2 |
| 1 | M.2 Dual Key A+E | M.2 Key A+E card-Footprint | J1 |
| 3 | 636101112001 | 63610111x001 | J2, J3, J4 |
| 1 | M.2 Mechanical Ground Pad | M.2 Mechanical Ground Pad Footprint | MH1 |
| 6 | ESD9R3.3ST5G | ONSC-SOD-923-2-514AB-01_V | D1, D2, D3, D4, D5, D6 |
| 1 | C1608X5R0J226M080AC | CAPC1608X100X20ML10 | C1 |
| 1 | GCM155R71H104KE02D | CAP0402C | C2 |
Similar boards
Module17 HMI Front Panel
M17-Project
102.8 × 30.3 mm4 parts2LCERN-OHL-W-2.0129
Module17 HMI
97 × 80.9 mm49 parts4LCERN-OHL-W-2.0129
Module17 HMI Back Panel
103 × 30.5 mm4 parts2LCERN-OHL-W-2.0129
GNSS Firehose
pmonta
117.9 × 99.1 mm457 parts4LTAPR-OHL-1.069
Fox-1-MPPT
FaradayRF
95 × 95 mm453 parts4LCustom license63
RASDR
myriadrf
59 × 62 mm250 parts6LNo license62