M.2-Templates
septentrio-gnss·moTi·KiCad_Files/KiCad/Library/M.2-Card-Footprints-main/M.2-Card-Footprints-main/KiCad/M.2-Templates.kicad_pcb
About the M.2-Templates PCB
M.2-Templates is an open source PCB design by septentrio-gnss, published on GitHub. It is a 2-layer board measuring 24 × 95 mm, with 4 components from 4 distinct parts.
Other key parts include the M.2-B+M-KEY, M.2-B-KEY, M.2-B-KEY-2280-ADAPTER and M.2-NO-KEY.
It belongs with the rf & radio designs in this gallery.
From the project
moTi: Is an M.2 Key B open source HW for mosaic G5-T GNSS modules of Septentrio
The footprints were created in Eagle. The KiCad versions are imports, they are looking good to me but you might want to look for quirks if you plan on using them in production.
The only footprint that has been verified with a PCB is the B-Key footprint. Though they all derive from the blank key footprint. So as long as the correct pads are removed and the key is in the right place you should have no issues with other keys. For the key position check out the spec sheet linked at the bottom.

Main components on the M.2-Templates
M.2-Templates bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M.2-B+M-KEY | M.2-B+M-KEY | U$1 |
| 1 | M.2-B-KEY | M.2-B-KEY | U$2 |
| 1 | M.2-B-KEY-2280-ADAPTER | M.2-B-KEY-2280-ADAPTER | U$3 |
| 1 | M.2-NO-KEY | M.2-KEY-BLANK | U$4 |
M.2-Templates design files
The KiCad project lives in the septentrio-gnss/moTi repository on GitHub; these links point at the commit this page was built from.
M.2-Templates: common questions
How big is the M.2-Templates PCB?
The M.2-Templates measures 24 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M.2-Templates?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the M.2-Templates design files?
From the septentrio-gnss/moTi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the M.2-Templates design in my own project?
The repository has no license, so all rights stay with septentrio-gnss. Use it as a reference, and ask the author before reusing the design.
More boards in moTi
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568