HardLabs

Uni clicker clone

sergiomd4·uni-clicker-clone·Hardware/UNIclicker.kicad_pcb

Uni clicker clone PCB layout, top view — open source board by sergiomd4

About the Uni clicker clone PCB

Uni clicker clone is an open source PCB design by sergiomd4, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 85 × 84.4 mm, with 101 components from 57 distinct parts.

Other key parts include the LTC3586EUFE, MCP1501T-20E/RW and PTN5150AHXMP. By type, the board carries 32 resistors, 25 capacitors, 7 transistors, 6 jumpers, 6 LEDs and 5 connectors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Compact development board designed as a complete solution

UNI Clicker Clone ========================================

UNI Clicker is a compact development board designed as a complete solution. It contains a MCU Card socket, four mikroBUS sockets for Click boards connectivity and power management.

Its core is a MCU Card socket that allows UNI Clicker to use different microcontrollers mounted on a standardized MCU Card. The MCU Card can be connected to the UNI Clicker by two 168-pin mezzanine connectors, one male and one female. This MCU Card supports architectures such as ARM, PIC32, dsPIC, PIC, AVR, Microchip, ST, NXP, TI and more.

Main components on the Uni clicker clone

LTC3586EUFEMCP1501T-20E/RWPTN5150AHXMP

Uni clicker clone bill of materials (BOM)

101 components, 57 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LTC3586EUFE
U2
1
MCP1501T-20E/RW
U3
1
PTN5150AHXMP
U7
2
DMP2305U-7
M1, M2
2
DMP1046UFDB-7
Q2, Q3
3
BSS138
Q4, Q5, Q6
2
DMG3420U-7
Q7, Q8
1
FX10A-168P-SV(71)
CN1
1
FX10A-168S-SV
CN2
1
USB_C_Receptacle_USB2.0
CN3
1
DS1069-11
J1
1
HM2X5
J10
1
MM3Z3V3B
DZ2
5
0.0
JP1, JP2, JP3, JP5, JP6
1
REF SEL
JP4
1
CHS-01TB
SW1
1
JS202011JCQN
SW2
5
SW_Push_Dual
T1, T2, T3, T4, T5
1
CHG
LED1
1
PWR
LED2
Show 37 more
QtyPartRefs
1
A
LED3
1
B
LED4
1
C
LED5
1
D
LED6
1
USBLC6-2P6
D1
3
PMEG3010ER
D2, D3, D4
1
3.3u
L1
2
2.2u
L2, L3
4
1u
C1, C5, C27, C55
2
100n
C2, C41
2
10000p
C16, C28
3
0.1u
C18, C25, C33
2
2.2u
C19, C20
1
33p
C21
2
47u
C22, C88
2
10p
C23, C29
1
300p
C24
3
22u
C30, C31, C49
3
10u
C32, C36, C40
1
470
R3
1
1M
R10
7
1k
R11, R17, R29, R30, R31, R32, R33
4
100k
R12, R13, R14, R41
1
2.2k
R15
6
10k
R16, R20, R40, R42, R49, R51
1
3.3k
R18
1
324k
R19
1
15k
R21
1
105k
R22
1
1.69k
R23
1
88.7k
R26
1
16.9k
R27
1
4.7k
R36
1
330
R43
1
47k
R50
1
5.1k
R52
1
12.1k
R53

Uni clicker clone design files

The KiCad project lives in the sergiomd4/uni-clicker-clone repository on GitHub; these links point at the commit this page was built from.

Uni clicker clone: common questions

How big is the Uni clicker clone PCB?

The Uni clicker clone measures 85 × 84.4 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the Uni clicker clone?

101 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Uni clicker clone design files?

From the sergiomd4/uni-clicker-clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Uni clicker clone design in my own project?

Yes, under the terms of its CC0-1.0 license, which sergiomd4 chose for the repository.

Similar boards