Z80 adapter
sharpie7·BeebFpga_MiSTer·rtl/AtomBusMon/kicad/z80/v1/z80_adapter.kicad_pcb
About the Z80 adapter PCB
Z80 adapter is an open source PCB design by sharpie7, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 49 × 75.2 mm, with 47 components from 14 distinct parts.
Other key parts include the Z80CPU and 74LVC4245. By type, the board carries 15 capacitors, 14 resistors, 7 ICs, 5 diodes, 3 connectors and 2 switches.
It belongs with the retro computing designs in this gallery.
From the project
This project is an open-source In-Circuit Emulator for the 6502, 65C02, Z80, 6809 and 6809E 8-bit processors.
This project is an open-source In-Circuit Emulator for the 6502, 65C02, Z80, 6809 and 6809E 8-bit processors.
For further details see the GitHub Project Wiki: https://github.com/hoglet67/AtomBusMon/wiki
If you have any questions or feedback, please join in the discussion thread at stardot.org.uk: http://stardot.org.uk/forums/viewtopic.php?f=44&t=9655
Main components on the Z80 adapter
Z80 adapter bill of materials (BOM)
47 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Z80CPU | dip40_smt_header | U1 |
| 6 | 74LVC4245 | SOIC-24W_7.5x15.4mm_Pitch1.27mm | U2, U3, U4, U5, U6, U7 |
| 2 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1, P2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | P3 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | LK1 |
| 2 | SW_Push | SW_Tactile_SKHH_Angled | SW1, SW2 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 2 | MBR130 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 12 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14 |
| 1 | 0pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C15 |
| 6 | 22K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 3 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
| 5 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R12, R13, R14 |
Z80 adapter design files
The KiCad project lives in the sharpie7/BeebFpga_MiSTer repository on GitHub; these links point at the commit this page was built from.
Z80 adapter: common questions
How big is the Z80 adapter PCB?
The Z80 adapter measures 49 × 75.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z80 adapter?
47 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Z80 adapter design files?
From the sharpie7/BeebFpga_MiSTer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Z80 adapter design in my own project?
Yes, under the terms of its GPL-2.0 license, which sharpie7 chose for the repository.
More boards in BeebFpga_MiSTer
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k