Aether rev2

ShauryaAttreya37·aether-smart-badge·PCB_design/aether-rev2/aether-rev2.kicad_pcb

Aether rev2 PCB layout, top view — open source board by ShauryaAttreya37

About the Aether rev2 PCB

Aether rev2 is an open source PCB design by ShauryaAttreya37, published on GitHub under the MIT license. It is a 2-layer board measuring 82 × 71 mm, with 31 components from 25 distinct parts.

By type, the board carries 13 connectors, 9 resistors, 5 capacitors, 1 transistor, 1 jumper and 1 switch.

It belongs with the wearables, sensors and iot & wireless designs in this gallery.

From the project

Wearable PM2.5 dose badge, phone app and Delhi air-quality forecast. Firmware, PCB, CAD, PWA, FastAPI, ML. By Shaurya Attreya.

Designed and built by Shaurya Attreya · Portfolio · Project page

A clip-on badge that measures the PM2.5 an outdoor worker breathes, buzzes before exposure gets dangerous, and adds up the dose over a shift. A phone app reads the badge over Bluetooth and shows a 72-hour PM2.5 forecast for Delhi from a small server.

I built it solo for vivo Ignite 2026, a national student innovation competition in India: firmware, PCB, 3D-printed enclosure, phone app, API server and forecast model. This repository is the public copy of that work.

Aether rev2, from the project README
From the project README

Aether rev2 bill of materials (BOM)

31 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BSS84
Q1
1
XIAO lower D0-D6
J1
1
XIAO upper power-D7
J2
1
XIAO battery-pad leads
J3
1
SPS30 UART ZH1.5
J4
1
ST7789 PH2.0 cable
J5
1
ST7789 2.54 alternate
J6
1
BME280 harness 0x77
J7
1
LIS3DH harness 0x18
J8
1
DRV2605L harness 0x5A
J9
1
PCF8574 harness 0x20
J10
1
LiPo 1S protected / check polarity
J11
1
MT3608 input leads
J12
1
MT3608 output leads
J13
1
SPS power shunt / remove to trim
JP1
1
Acknowledge / dose reset
SW1
1
Alert LED red
D1
3
100n 16V
C1, C2, C5
2
10u 16V X5R
C3, C4
2
100k 1%
R1, R2
Show 5 more
QtyPartRefs
2
4k7 DNP
R3, R4
2
10K
10k
R5, R9
1
100K
100k
R6
1
100R BL verify module
R7
1
330R
R8

Aether rev2 design files

The KiCad project lives in the ShauryaAttreya37/aether-smart-badge repository on GitHub; these links point at the commit this page was built from.

Aether rev2: common questions

How big is the Aether rev2 PCB?

The Aether rev2 measures 82 × 71 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aether rev2?

31 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aether rev2 design files?

From the ShauryaAttreya37/aether-smart-badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aether rev2 design in my own project?

Yes, under the terms of its MIT license, which ShauryaAttreya37 chose for the repository.

More boards in aether-smart-badge

Similar boards