Aether rev2-unrouted
ShauryaAttreya37·aether-smart-badge·PCB_design/aether-rev2/aether-rev2-unrouted.kicad_pcb
About the Aether rev2-unrouted PCB
Aether rev2-unrouted is an open source PCB design by ShauryaAttreya37, published on GitHub under the MIT license. It is a 2-layer board measuring 82 × 71 mm, with 31 components from 25 distinct parts.
By type, the board carries 13 connectors, 9 resistors, 5 capacitors, 1 transistor, 1 jumper and 1 switch.
It belongs with the wearables, sensors and iot & wireless designs in this gallery.
From the project
Wearable PM2.5 dose badge, phone app and Delhi air-quality forecast. Firmware, PCB, CAD, PWA, FastAPI, ML. By Shaurya Attreya.
Designed and built by Shaurya Attreya · Portfolio · Project page
A clip-on badge that measures the PM2.5 an outdoor worker breathes, buzzes before exposure gets dangerous, and adds up the dose over a shift. A phone app reads the badge over Bluetooth and shows a 72-hour PM2.5 forecast for Delhi from a small server.
I built it solo for vivo Ignite 2026, a national student innovation competition in India: firmware, PCB, 3D-printed enclosure, phone app, API server and forecast model. This repository is the public copy of that work.

Aether rev2-unrouted bill of materials (BOM)
31 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BSS84 | SOT-23 | Q1 |
| 1 | XIAO lower D0-D6 | PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | XIAO upper power-D7 | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | XIAO battery-pad leads | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SPS30 UART ZH1.5 | JST_ZH_B5B-ZR_1x05_P1.50mm_Vertical | J4 |
| 1 | ST7789 PH2.0 cable | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J5 |
| 1 | ST7789 2.54 alternate | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | BME280 harness 0x77 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LIS3DH harness 0x18 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | DRV2605L harness 0x5A | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | PCF8574 harness 0x20 | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | LiPo 1S protected / check polarity | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J11 |
| 1 | MT3608 input leads | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | MT3608 output leads | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | SPS power shunt / remove to trim | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Acknowledge / dose reset | SW_PUSH_6mm | SW1 |
| 1 | Alert LED red | LED_0805_2012Metric | D1 |
| 3 | 100n 16V | C_0805_2012Metric | C1, C2, C5 |
| 2 | 10u 16V X5R | C_0805_2012Metric | C3, C4 |
| 2 | 100k 1% | R_0805_2012Metric | R1, R2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4k7 DNP | R_0805_2012Metric | R3, R4 |
| 2 | 10K 10k | R_0805_2012Metric | R5, R9 |
| 1 | 100K 100k | R_0805_2012Metric | R6 |
| 1 | 100R BL verify module | R_0805_2012Metric | R7 |
| 1 | 330R | R_0805_2012Metric | R8 |
Aether rev2-unrouted design files
The KiCad project lives in the ShauryaAttreya37/aether-smart-badge repository on GitHub; these links point at the commit this page was built from.
Aether rev2-unrouted: common questions
How big is the Aether rev2-unrouted PCB?
The Aether rev2-unrouted measures 82 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aether rev2-unrouted?
31 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aether rev2-unrouted design files?
From the ShauryaAttreya37/aether-smart-badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Aether rev2-unrouted design in my own project?
Yes, under the terms of its MIT license, which ShauryaAttreya37 chose for the repository.
More boards in aether-smart-badge
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k