Pcb unrouted
ShauryaAttreya37·aether-smart-badge·PCB_design/pcb/pcb-unrouted.kicad_pcb
About the Pcb unrouted
Pcb unrouted is an open source PCB design by ShauryaAttreya37, published on GitHub under the MIT license. It is a 2-layer board measuring 82 × 71 mm, with 19 components from 17 distinct parts.
By type, the board carries 11 connectors, 4 resistors, 3 capacitors and 1 diode.
It belongs with the wearables, sensors and power & battery designs in this gallery.
From the project
Wearable PM2.5 dose badge, phone app and Delhi air-quality forecast. Firmware, PCB, CAD, PWA, FastAPI, ML. By Shaurya Attreya.
Two-layer, 82.0 × 71.0 mm, 1.6 mm. Fully routed, DRC clean, schematic parity clean, ERC clean.
pcb.kicadsch and pcb.kicadpcb are written by scripts. Open them in KiCad to look, measure and plot — but any edit you make in the GUI is lost the next time the generator runs.
- hardware/pcb/geometry.py — every dimension. Board outline, mounting holes, module envelopes, antenna keepout. If a number is wrong, it is wrong here. - hardware/pcb/buildbadge.py — netlist, placement, silkscreen, schematic. Pin assignments mirror firmware/include/config.h; change both together. - hardware/pcb/routebadge.py…
Pcb unrouted bill of materials (BOM)
19 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO lower D0-D6 | PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | XIAO upper 5V-D7 | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | LiPo 1S protected | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | Power switch (SPST) | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | MT3608 IN | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | MT3608 OUT 5.00V | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | SPS30 UART ZH1.5 | JST_ZH_B5B-ZR_1x05_P1.50mm_Vertical | J7 |
| 1 | SPI TFT 9-pin harness | PinHeader_1x09_P2.54mm_Vertical | J8 |
| 1 | BME280 harness 0x77 | PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | DRV2605L harness 0x5A | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | XIAO BAT pad leads | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Alert LED red | LED_D5.0mm | D1 |
| 1 | 100n 16V | C_0805_2012Metric | C1 |
| 2 | 10u 16V X5R | C_0805_2012Metric | C2, C3 |
| 1 | 330R | R_0805_2012Metric | R1 |
| 2 | 4k7 DNP | R_0805_2012Metric | R2, R3 |
| 1 | 0R backlight | R_0805_2012Metric | R4 |
Pcb unrouted design files
The KiCad project lives in the ShauryaAttreya37/aether-smart-badge repository on GitHub; these links point at the commit this page was built from.
Pcb unrouted: common questions
How big is the Pcb unrouted?
The Pcb unrouted measures 82 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb unrouted?
19 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcb unrouted design files?
From the ShauryaAttreya37/aether-smart-badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pcb unrouted design in my own project?
Yes, under the terms of its MIT license, which ShauryaAttreya37 chose for the repository.
More boards in aether-smart-badge
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k