HardLabs

Kicon19-blinky

ShawnHymel·kicon19-blinky·Hardware/kicon19-blinky/kicon19-blinky.kicad_pcb

Kicon19-blinky PCB layout, top view — open source AVR/Arduino board by ShawnHymel
Simulate this board

About the Kicon19-blinky PCB

Kicon19-blinky is an open source AVR/Arduino PCB design by ShawnHymel, published on GitHub. It is a 2-layer board measuring 25.4 × 63.5 mm, with 9 components from 7 distinct parts.

Its main chip is the ATTINY85-20PU, from the AVR/Arduino family. By type, the board carries 3 resistors, 2 diodes, 1 IC, 1 battery holder, 1 switch and 1 capacitor.

From the project

Blinky Pin for KiCon 2019 =========================

Blinky Pin for KiCon 2019 =========================

Pin badge developed for KiCon 2019. Workshop used to teach people the basics of KiCad.

Follow the instructions found in the Worksheet - Intro to KiCad PDF.

Bill of Materials (BOM) -----------------------

To build the pin/badge, refer to the BOM file found here.

The code is beerware; if you see me at the local, and you've found the code helpful, please buy me a round!

Main components on the Kicon19-blinky

ATTINY85-20PU

Kicon19-blinky bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY85-20PU
ATtiny85-20PU
U1
1
103
Battery_Cell
BT1
1
OS102011MS2QN1
SW_SPDT
SW1
2
WP7113ID
LED
D1, D2
1
C324C106K3R5TA
10uF
C1
1
CF14JT10K0
10k
R1
2
CF14JT100R
100
R2, R3

Kicon19-blinky design files

The KiCad project lives in the ShawnHymel/kicon19-blinky repository on GitHub; these links point at the commit this page was built from.

Kicon19-blinky: common questions

What microcontroller does the Kicon19-blinky use?

The Kicon19-blinky is built around the ATTINY85-20PU, from the AVR/Arduino family.

How big is the Kicon19-blinky PCB?

The Kicon19-blinky measures 25.4 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicon19-blinky?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicon19-blinky design files?

From the ShawnHymel/kicon19-blinky repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Kicon19-blinky design in my own project?

The repository has no license, so all rights stay with ShawnHymel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicon19-blinky without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards