Smart-Home-Arduino
Shimbs-20·Smart-Home-Arduino-PCB·Embedded_pcb/Embedded_pcb.kicad_pcb
About the Smart-Home-Arduino PCB
Smart-Home-Arduino is an open source PCB design by Shimbs-20, published on GitHub. It is a 2-layer board measuring 101.6 × 60 mm, with 13 components from 12 distinct parts.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Custom Arduino Shield PCB for 220V Home Automation with Mobile App Control.
This project is a custom-designed PCB Shield for Arduino that enables safe control of high-voltage home appliances (220V AC) via a mobile application.
Smart-Home-Arduino bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 2 | Analog | PinSocket_1x08_P2.54mm_Vertical | J3, J5 |
| 1 | PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Communication | PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Digital | PinSocket_2x18_P2.54mm_Vertical | J7 |
| 1 | Bluetooth_HC | PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | Relay | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Door Sensor | PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | Switch | PinSocket_1x02_P2.54mm_Vertical | J11 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J12 |
| 1 | Alarm | PinSocket_1x02_P2.54mm_Vertical | J13 |
Smart-Home-Arduino design files
The KiCad project lives in the Shimbs-20/Smart-Home-Arduino-PCB repository on GitHub; these links point at the commit this page was built from.
Smart-Home-Arduino: common questions
How big is the Smart-Home-Arduino PCB?
The Smart-Home-Arduino measures 101.6 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart-Home-Arduino?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart-Home-Arduino design files?
From the Shimbs-20/Smart-Home-Arduino-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart-Home-Arduino design in my own project?
The repository has no license, so all rights stay with Shimbs-20. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k