HardLabs

Pcb dev dsPIC30F3011

shishir-dey·pcb-dev-dsPIC30F3011·hardware/pcb-dev-dsPIC30F3011/pcb-dev-dsPIC30F3011.kicad_pcb

Pcb dev dsPIC30F3011 layout, top view — open source PIC board by shishir-dey

About the Pcb dev dsPIC30F3011

Pcb dev dsPIC30F3011 is an open source PIC PCB design by shishir-dey, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 32 mm, with 27 components from 21 distinct parts.

Its main chip is the DSPIC30F3011-30I_PT, from the PIC family. By type, the board carries 8 capacitors, 6 connectors, 6 resistors, 3 diodes, 1 IC and 1 transistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A 2-layer development board with a dsPIC30F3011 microcontroller. Made with KiCad

Pcb dev dsPIC30F3011, from the project README
From the project README

Main components on the Pcb dev dsPIC30F3011

DSPIC30F3011-30I_PT

Pcb dev dsPIC30F3011 bill of materials (BOM)

27 components, 21 distinct parts.

QtyPartRefs
1
DSPIC30F3011-30I_PT
U1
1
BC847, SOT-23
Q1
1
Crystal
Y1
1
Conn_PIC_ICSP_ICD
J1
2
4 pin JST 2.54
J2, J3
1
10 pin JST 2.54
J4
1
16 pin header 2.54
J5
1
8 pin JST 2.54
J6
1
Jumper
JP1
2
D
D1, D2
1
CLL4148
D3
2
22pf, 0805
C1, C2
1
2.2uF, 25V
C3
1
10nF, 63V
C4
4
104, 0805
C5, C6, C7, C8
1
22K,0805
R1
1
470E,0805
R2
1
SHORT
R3
1
1K
R4
1
9.1K
R5
Show 1 more
QtyPartRefs
1
22E
R6

Pcb dev dsPIC30F3011 design files

The KiCad project lives in the shishir-dey/pcb-dev-dsPIC30F3011 repository on GitHub; these links point at the commit this page was built from.

Pcb dev dsPIC30F3011: common questions

What microcontroller does the Pcb dev dsPIC30F3011 use?

The Pcb dev dsPIC30F3011 is built around the DSPIC30F3011-30I_PT, from the PIC family.

How big is the Pcb dev dsPIC30F3011?

The Pcb dev dsPIC30F3011 measures 70 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb dev dsPIC30F3011?

27 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb dev dsPIC30F3011 design files?

From the shishir-dey/pcb-dev-dsPIC30F3011 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb dev dsPIC30F3011 design in my own project?

Yes, under the terms of its MIT license, which shishir-dey chose for the repository.

Can I test firmware for the Pcb dev dsPIC30F3011 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards