Vintage-Keyboard-Memory-Replacement
ShreksHellraiser·Vintage-Keyboard-Memory-Replacement·Keyboard Memory Emulator/Keyboard Memory Emulator.kicad_pcb
About the Vintage-Keyboard-Memory-Replacement PCB
Vintage-Keyboard-Memory-Replacement is an open source AVR/Arduino PCB design by ShreksHellraiser, published on GitHub. It is a 2-layer board measuring 94 × 38.1 mm, with 40 components from 18 distinct parts.
Its main chip is the ATmega32-16AU, from the AVR/Arduino family. Other key parts include the SN74HC244APWR, MC74VHC1G04DBVT1G, UPD4168C, IS62C256AL-45ULI-TR and 74LV245APWJ. By type, the board carries 12 ICs, 11 capacitors, 8 connectors, 5 resistors, 2 diodes and 1 crystal.
It belongs with the keyboards and retro computing designs in this gallery.
From the project
ABANDONED UNFINISHED - A memory replacement PCB that adds sample loading and saving to the SK-1
This has not been tested yet and is still in early stages of development
Main components on the Vintage-Keyboard-Memory-Replacement
Vintage-Keyboard-Memory-Replacement bill of materials (BOM)
40 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | SN74HC244APWR | TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2, U5, U10, U11 |
| 2 | MC74VHC1G04DBVT1G | SC-74A | U3, U9 |
| 1 | UPD4168C | DIP-28_W15.24mm | U4 |
| 1 | IS62C256AL-45ULI-TR | SOIC-28W_7.5x18.7mm_P1.27mm | U6 |
| 2 | 74LV245APWJ | TSSOP-20_4.4x6.5mm_P0.65mm | U7, U12 |
| 1 | ATmega32-16AU | TQFP-44_10x10mm_P0.8mm | U8 |
| 1 | 32.768kHz | Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1, J7 |
| 1 | Conn_01x01_Male | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3, J5 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | PTS636 SL43 LFS | SW_SPST_REED_CT05-XXXX-G1 | SW1 |
| 2 | 1N4148 | D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2 |
| 9 | 100n | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2, C3, C4, C5, C8, C9, C10 +1 |
| 2 | 12.5p | C_Disc_D5.1mm_W3.2mm_P5.00mm | C6, C7 |
| 5 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5 |
Vintage-Keyboard-Memory-Replacement design files
The KiCad project lives in the ShreksHellraiser/Vintage-Keyboard-Memory-Replacement repository on GitHub; these links point at the commit this page was built from.
Vintage-Keyboard-Memory-Replacement: common questions
What microcontroller does the Vintage-Keyboard-Memory-Replacement use?
The Vintage-Keyboard-Memory-Replacement is built around the ATmega32-16AU, from the AVR/Arduino family.
How big is the Vintage-Keyboard-Memory-Replacement PCB?
The Vintage-Keyboard-Memory-Replacement measures 94 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vintage-Keyboard-Memory-Replacement?
40 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vintage-Keyboard-Memory-Replacement design files?
From the ShreksHellraiser/Vintage-Keyboard-Memory-Replacement repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Vintage-Keyboard-Memory-Replacement design in my own project?
The repository has no license, so all rights stay with ShreksHellraiser. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vintage-Keyboard-Memory-Replacement without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k