Hackpad.v1

shreyanshlakra724-sketch·Hackpad.v1

Hackpad.v1

About the Hackpad.v1 PCB

Hackpad.v1 is an open source RP2040/RP2350 PCB design by shreyanshlakra724-sketch, published on GitHub. It is a board, with 12 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 9 switches, 2 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

This is a 9 key macropad based on XIAO-RP2040 microcontroller, it features 2 leds and 9 keys which can custom mapped to whatever you require it for by changing the mapping in the firmware.py file. Purpose of this macorpad is to allow easy and quick access to important functions a

This is a 9 key macropad based on XIAO-RP2040 microcontroller, it features 2 leds and 9 keys which can custom mapped to whatever you require it for by changing the mapping in the firmware.py file. Purpose of this macorpad is to allow easy and quick access to important functions according to your needs such as a single key be assigned to undo or redo, pause or play any media or whatever key combination/key you wish to set it to .A working schematic below shows how this project works:

Main components on the Hackpad.v1

Hackpad.v1 bill of materials (BOM)

12 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-SMD
U1
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
2
SK6812MINI
D1, D2

Hackpad.v1 design files

The KiCad project lives in the shreyanshlakra724-sketch/Hackpad.v1 repository on GitHub; these links point at the commit this page was built from.

Hackpad.v1: common questions

What microcontroller does the Hackpad.v1 use?

The Hackpad.v1 is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.

How many components are on the Hackpad.v1?

12 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackpad.v1 design files?

From the shreyanshlakra724-sketch/Hackpad.v1 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackpad.v1 design in my own project?

The repository has no license, so all rights stay with shreyanshlakra724-sketch. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hackpad.v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards